You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »


Additional sections:

This object contains signaling packet capture devices and admin state. The Signaling Packet Capture data is stored in a ".PKT" file under /var/log/sonus/evlog/evlog location.

In the absence of any device or filter configuration, The Signaling Packet Capture will capture only the SIP/H323 signaling for calls which are traced by Call Trace Filters.

To View and Edit Signaling Packet Capture

On SBC main screen, go to Troubleshooting > Troubleshooting Configuration > Call Trace > Signaling Packet Capture.

The Signaling Packet Capture window is displayed.

Troubleshooting - Call Trace - Signaling Packet Capture

 

The following fields are displayed:

Signaling Packet Capture Parameters

Parameter Description
Signaling Packet Capture TimerSpecifies the signaling packet capture timer in seconds. It describes the call trace timer for both Calls and Error Trace Filters. The value ranges from 0 to 360 seconds and the default value is 180 seconds.
State

Use this flag to enable/disable Signaling Packet Captures. It also specifies the administrative state of signaling packet capture:

  • disabled (default)
  •  enabled

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

  • No labels