request system

The request system command applies to both system-level and configure modes except where noted. The following objects apply to this command:

admin

Command Syntax

MultiExcerpt named adminRequestSyntax was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro

Command Parameters

MultiExcerpt named adminRequestParameters was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro

congestion

Command Syntax

> request system congestion
	cpuhistory type <all | oneSecSample | rsiAverage | rsiWeightedAvg>
	memhistory type <all | oneSecSample | rsiAverage | rsiWeightedAvg>
	setDebugSysCongestion debugflag <disabled | enabled>
	setSysCongestion 
		level <mc0 | mc1 | mc2 | mc3> 
		res <cpu | memory>
	setSysIpInstance 
		instance <unsignedInt> 
		iptype <h323 | sip | sipreg>

Command Parameters

'request system congestion' Command Parameters

Parameter	Description
`cpuhistory type`	Displays the CPU usage history. `all` – Displays all of the following usage histories. `oneSecSample` – Displays the CPU usage for every second. The usage is reported for the CPU that has highest utilization for that second. `rsiAverage` – Displays the average of the one second samples for the resample interval, usually three (3) samples. The usage is reported for the CPU with the highest rsi average for the resample interval. `rsiWeightedAvg` – Displays the weighted average. The weighted average is a running average of waited samples where the current sample is computed using the formula below: resourceAVGFactor * ( previous weighted sample) * (1-resourceAVGFactor) * (current rsi average). The resourceAvgFactor usually = 30%. The usage is reported for the CPU that has weighted average for the resample interval.
`memhistory`	Displays the memory usage history. `all` – Displays all of the following usage histories. `oneSecSample` – Displays the memory usage for every second. `rsiAverage` – Displays the average of the one second samples for the resample interval, usually three (3) samples. `rsiWeightedAvg` `–` Displays the weighted average. The weighted average is a running average of waited samples where the current sample is computed using the formula below: resourceAVGFactor * ( previous weighted sample) * (1-resourceAVGFactor) * (current rsi average). The resourceAvgFactor usually = 30%.
`setDebugSysCongestion debugflag`	Enable/disable the debug flag associated with system congestion. `disabled` `enabled`
`setSysCongestion`	Simulates CPU or memory resource congestion for the specified level. `level` `mc0` – Simulate machine congestion level 0 ( no congestion). `mc1` – Simulate machine congestion level 1. `mc2` – Simulate machine congestion level `2`. `mc3` – Simulate machine congestion level `3`. `res` – `cpu` – Simulate CPU congestion. `memory` – Simulate memory congestion.
`setSysIpInstance`	Direct all calls of a specific type or SIP registrations to a specific instance of call processing engine. `instance <unsignedInt>` – Instance ID of the call processing engine. `iptype` – Choose an IP type: `h323` – Direct all H.323 calls to the specified instance. `sip` – Direct all SIP calls to the specified instance. `sipreg` – Direct all SIP registrations to the specified instance.

ethernetPort

Command Syntax

% request system ethernetPort packetAdmin <host name> <pkt0 | pkt1> switchover

Command Parameter

Ethernet Port 'request' Parameter

Parameter	Length/Range	Description
`switchover`	N/A	Use this parameter to initiate a port switchover within a redundancy pair. The `switchover` command only applies to pkt0 and pkt1 on Unable to show "metadata-from": No such page "_space_variables" active CE.

ipPolicing

Command Syntax

> request system ipPolicing resetOffendersList name 
  aclOffendersList 
  aggregateOffendersList 
  arpOffendersList 
  badEtherIpHdrOffendersList 
  discardRuleOffendersList 
  ipSecDecryptOffendersList 
  mediaOffendersList 
  rogueMediaOffendersList 
  uFlowOffendersList

logout

Operational mode only.

Command Syntax

> request system logout user <user_Id>

policyServer

Command Syntax

> request system policyServer remoteServer <server_name>

security

For additional security configuration details, see PKI Security - CLI.

Command Syntax

% request system security pki 
	certificate <certificate name>
		generateCSR
			csrSub (max 255 chars)
			keySize (ketSize1K | keySize2K)
			subjectAlternativeDnsName (0-512 chars)
		importCert certContent (max 4096 chars)
		retrieveCertContent
	uploadCertificate

Command Parameters

request system security Parameters

Parameter

Length/Range

Description

certificate

N/A

The collection of certificates configured on SBC.

<certificateName> – Certificate name.
generateCSR – Use this parameter to generate CSR (Certificate Signing Request).
- csrSub – CSR subject name (max 255 chars).
- keySize – Size of the key to generate private key via openssl command.
  - keySize1K
  - keySize2K
- subjectAlternativeDnsName – Alternative DNS subject name(s). Multiple alternative names can be specified using "," (comma) separator. (0-512 chars).
  Example: "nj.sonusnet.com, in.sonusnet.com, uk.sonusnet.com, ca.sonusnet.com, tx.sonusnet.com"
importCert – Import PEM format certificate.
retrieveCertContent – Retrieve content of an existing PKI certificate (local, local-internal and remote).

uploadCertificate

N/A

Upload a pk12 certificate.

Command Example

To retrieve certificate content of an existing PKI certificate:

% request system security pki certificate server retrieveCertContent
result Certificate:
    Data:
        Version: 1 (0x0)
        Serial Number: 13211600523504912060 (0xb75908ad95e006bc)
    Signature Algorithm: sha1WithRSAEncryption
        Issuer: C=US, ST=MA, L=Westford, O=VeriSign
        Validity
            Not Before: Apr 28 09:56:54 2015 GMT
            Not After : Jul 12 09:56:54 2033 GMT
        Subject: C=IN, ST=TN, L=Chennai
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:c5:80:dc:59:0a:8d:98:19:0b:bd:be:fd:ab:6c:
                    f7:e9:b6:28:d9:e8:fe:a5:84:fb:45:d9:16:97:f5:
                    fc:9f:df:7b:5b:03:6e:34:38:3f:10:2b:d0:d8:d6:
                    4a:03:5f:2a:78:85:4c:65:d4:0d:a6:e2:d3:be:1a:
                    fc:8b:96:a1:db:15:16:74:3e:9f:2a:34:95:88:6a:
                    49:3b:1e:78:15:bf:5c:e8:ec:a3:0d:8b:d4:2a:39:
                    d6:17:c1:a8:88:94:36:23:23:d5:3b:2c:49:fb:15:
                    d3:e6:7f:72:b0:e4:3d:e6:3a:44:f3:ac:a2:d3:2a:
                    62:f7:2f:d1:d4:a1:82:fe:03:57:49:1d:6b:12:14:
                    2c:28:f8:ef:6c:e0:c2:36:8c:7f:77:2a:32:d9:ce:
                    c7:9e:fc:4f:20:aa:43:db:b1:77:16:e9:d5:b5:44:
                    ff:06:8a:85:d4:74:63:af:3c:5e:f3:a3:e0:83:5a:
                    40:d1:5d:fc:84:36:34:b4:8b:ac:f1:5b:2c:b6:0e:
                    97:bc:1b:cd:a4:f8:17:b3:81:42:41:db:09:bb:79:
                    42:1f:92:dc:43:52:ca:78:e3:db:3d:db:e9:f6:39:
                    15:eb:3a:09:e5:ab:eb:18:5f:7e:14:ec:f9:b6:04:
                    9e:f5:6d:73:f4:ea:85:c4:4a:1f:5a:01:8f:2e:94:
                    b6:0d
                Exponent: 65537 (0x10001)
    Signature Algorithm: sha1WithRSAEncryption
         1a:91:c0:8a:b8:66:4b:a2:67:bc:99:4f:b4:0b:f8:bc:67:0e:
         de:23:37:42:bc:dd:96:64:7c:ef:e1:05:c7:eb:92:06:fa:ef:
         7b:72:ee:7f:26:b5:1c:39:b5:f2:b2:04:6e:2e:0c:1d:7e:1f:
         7a:87:b8:8b:9c:25:e2:8f:77:6f:ac:bb:a0:63:28:51:4f:7c:
         35:30:ad:31:24:85:f3:99:6d:c2:f8:33:eb:49:45:ed:ab:26:
         97:f4:04:a7:0a:06:dd:40:c3:f6:1a:0e:ec:72:0f:40:65:ab:
         34:4a:dc:51:2b:f3:61:b6:3a:1c:26:09:a1:af:37:dc:bf:a5:
         ba:dd
No Trusted Uses.
No Rejected Uses.
Alias: Server Cert
Key Id: 79:70:FC:99:1A:2B:15:A7:A1:33:21:F7:8A:57:0C:A7:07:7B:96:35
 
status 0

serverAdmin

Command Syntax

> request system serverAdmin <server_name>  
	forceCoreDump coreDumpType <full | partial>
	identify duration <0-255 seconds> 
	removeCoredump coredumpFileName <filename> 
	restart  
	softReset  
	startSoftwareUpgrade  
		integrityCheck <perform | skip>
		package <pkg_name> 
		rpmName <name> 
		versionCheck <perform | skip>

Command Parameters

'request system serverAdmin' Command Parameters

Parameter	Length/Range	Description
`<serverName>`	N/A	The unique name of the server.
`forceCoreDump`	N/A	Use this command to force the termination of a fixed set of application processes with accompanying core dumps for troubleshooting purposes. By default, a full dump is performed if no option is specified. Before the command executes, the user is prompted to confirm or cancel the operation. If canceled, no further action is taken, and application operation is not affected. `coreDumpType`– Choose an option below: `full` (default) – Full set of processes to dump (see Table 2 below). `partial` – Partial set of processes to dump (see Table 3 below).
`identify duration`	0-255 seconds	The duration (in seconds) to illuminate the locator LED of this server. The LED illuminates for the specified number of seconds and then extinguishes. A duration of "0" turns off the locator LED and a duration of "255" turns on the locator LED indefinitely. If the duration is not specified, the default value of 15 seconds is used.
`removeCoredump`	N/A	Use this object to remove the specified coredump from the chosen server. `coredumpFileName` `<filename>` – The name of the coredump file.
`restart`	N/A	Restart the specified server.
`softReset`	N/A	Restart the application on the server without rebooting the server.
`startSoftwareUpgrade`	N/A	Use this control to start a software upgrade on the specified server. `integrityCheck` – Use this flag to specify whether or not to perform an integrity check (signature validation) against Unable to show "metadata-from": No such page "_space_variables" software updates and patches as they are uploaded to the Unable to show "metadata-from": No such page "_space_variables" system. `perform` (default) `skip` `package` – Name of the new package. `rpmName` – Name of the rpm/package, if different from the file name of the .tar.gz. `versionCheck`– Use this flag to perform/skip version checking during software upgrades. `perform` (default) `skip`

Full Application Process List

CamProcess	ChmProcess	CpxAppProc	DiamProcess
DnsProcess	DsProcess	EmaProcess	EnmProcessMain
FmMasterProcess	IkeProcess	ImProcess	IpmProcess
PathchkProcess	PesProcess	PipeProcess	PrsProcess
RtmProcess	SamProcess	ScmProcess_0	ScmProcess_1
ScmProcess_2	ScmProcess_3	ScpaProcess	SmProcess
SsaProcess	SsreqProcess

Partial Application Process List

Process	PrsProcess	RtmProcess
SamProcess	ScmProcess_0	ScmProcess_1
ScmProcess_2	ScmProcess_3	SmProcess

Space shortcuts

Page tree

admin

Command Syntax

Command Parameters

congestion

Command Syntax

Command Parameters

ethernetPort

Command Syntax

Command Parameter

ipPolicing

Command Syntax

logout

Command Syntax

policyServer

Command Syntax

security

Command Syntax

Command Parameters

Command Example

serverAdmin

Command Syntax

Command Parameters