Additional section:
In this section:
This object specifies the VPC device name for E911 server. This parameter is used to define E911 VoIP Positioning Center device data for the
Unable to show "metadata-from": No such page "_space_variables"
to use for queries to one or more E911Vpc Device. VPCs for the Emergency Services Routing Number of the Public Services Answering Point nearest the current location of the caller.To View E911 Vpc Device
On SBC main screen, go to All > Global > E911 Vpc Device. The E911 Vpc Device List window is displayed.
Global - Servers - E911 Vpc Device
e
To Edit E911 Vpc Device
To edit any of the E911 Vpc Device in the list, click the radio button next to the specific E911 Vpc Device name.
Global - Servers - E911 Vpc Device Highlighted
The Edit Selected E911 Vpc Device window is displayed below.
Global - Servers - E911 Vpc Device Edit
The Object E911 Vpc Device cannot be edited as the fields are read only.
To Create E911 Vpc Device
To create a new E911 Vpc Device , click New E911Vpc Device tab on the E911 Vpc Device List panel.
Global - Servers - E911 Vpc Device Fields
The Create New E911 Vpc Device window is displayed.
Global - E911 Vpc Device Create
The following fields are displayed:
Global - Servers - E911 Vpc Device Create
| Parameter | Description |
|---|---|
Name | The identifier for this VCP. |
| Device Data | |
| Enter the call priority. |
| Enter the IP address. Both IPv4 and IPv6 addresses are supported. |
| Enter the port number. |
To Delete E911 Vpc Device
To delete any of the created E911 Vpc Device, click the radio button next to the specific E911 Vpc Device which you want to delete.
Global - Servers - E911 Vpc Device Highlighted
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Global - Servers - E911 Vpc Device Delete Confirmation
Click Yes to remove the specific E911 Vpc Device from the list.
Overview
Content Tools