Creates a FAX Codec Profile given a specific Table ID.
The FAX Codec Profile identifier can only be within the range 1-9999 (inclusive)
https://134.56.227.163/rest/faxcodecprofile/{identifier}
PUT
true
Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
---|---|---|---|---|---|---|
Description | No | No | string | none | 64 - Max Length | Identifies this profile so it can be easily recognized when selecting a codec. |
FaxRelayFallBack | No | No | Enum | 0 | Possible values:
| Specifies if the T.38 should fall back to Fax Passthrough if not supported by peer. |
FaxRateInBitsPerSecond | No | No | int | 14400 | Possible values:
|
Specifies the maximum fax connection rate. Acceptable rate values are:
|
SignalingPacketRedundancy | No | No | int | 3 | Possible values:
| Specifies the number of redundant packets to be sent for each T.30 (signaling) message. |
PayloadPacketRedundancy | No | No | int | 0 | Possible values:
| Specifies the number of redundant packets to be sent for each packet containing page data. |
ErrorCorrectionMode | No | No | Enum | 0 | Possible values:
| Specifies the error correction mode (ECM) for fax calls. |
TrainingConfirmation | No | No | Enum | 1 | Possible values:
|
Specifies the Training Confirmation (TCF) procedure for fax calls.
|
curl --cookie PHPSESSID=cuc2h83fqaispmu6m519sa5642 -s -k -i https://134.56.72.218/rest/faxcodecprofile/10001 -X PUT --data "PayloadPacketRedundancy=0&SignalingPacketRedundancy=3&FaxRateInBitsPerSecond=14400&ConfigIEState=1&Description=REST FAX&TrainingConfirmation=1&ErrorCorrectionMode=0&FaxRelayFallBack=0"
<?xml version="1.0"?> <root> <status> <http_code>200</http_code> </status> <faxcodecprofile id="10001" href="https://134.56.72.218/rest/faxcodecprofile/10001"> <Description>REST FAX</Description> <ErrorCorrectionMode>0</ErrorCorrectionMode> <FaxRateInBitsPerSecond>14400</FaxRateInBitsPerSecond> <FaxRelayFallBack>0</FaxRelayFallBack> <PayloadPacketRedundancy>0</PayloadPacketRedundancy> <SignalingPacketRedundancy>3</SignalingPacketRedundancy> <TrainingConfirmation>1</TrainingConfirmation> </faxcodecprofile> </root>