You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »

 

Perform the following steps to save the existing 

Unable to show "metadata-from": No such page "_space_variables"
configuration. The backup file created by this procedure is used to restore the system configuration if reinstallation of the software is needed for any reason.

To reload the

Unable to show "metadata-from": No such page "_space_variables"
 configuration, refer to Restoring SBC Configuration for guidance.
Note

Restoring the

Unable to show "metadata-from": No such page "_space_variables"
configuration on a
Unable to show "metadata-from": No such page "_space_variables"
platform is not supported. Instead, load the saved configuration to a new
Unable to show "metadata-from": No such page "_space_variables"
instance.

 

  1. Log on to

    Unable to show "metadata-from": No such page "_space_variables"
     CLI. Execute the following command to save the
    Unable to show "metadata-from": No such page "_space_variables"
     configuration.

    Example:
    admin@SBC01a> request system admin SBC01 saveConfig 
This command will save the current configuration. Do you want to continue (yes/no) yes
Proceeding
result success
reason Configuration Saved as /var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz
    Note

    This command saves the current configuration to a time-stamped zipped tar file located in /var/log/sonus/sbx/config directory of SBC active server. 

  2. Use SFTP to copy the configuration file from the active server to the remote server. Following is an example to transfer the saved configuration file to a remote linux server.

    Example:
    # sftp -oPort=2024 admin@SBC01a:/var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz /home/bob/SBC01/config
admin@SBC01a's password: <admin>
Connected to SBC01a.
Fetching /var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz to /home/bob/SBC01/config

 

  • No labels