You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

In this section:

This object specifies the Use Location Table values for this Location code while cranking back on the next route.

To View Location

On SBC main screen, go to Configuration > Profile Management > Category: Call Routing Profiles > Crankback Profile > Reason > Location . 

Select the desired Crankback Profile and the desired Reason from the drop-down list to view and edit its respective Location list.

Profile Management - Crankback Profile - Reason - Location Main fields

The Location window is displayed.

Profile Management - Crankback Profile - Reason - Location

 

To Edit Location

To edit any of the Location in the list, click the radio button next to the specific Location name.

Profile Management - Crankback Profile - Reason - Location Highlighted

 

The Edit Selected Location window is displayed below.

Profile Management - Crankback Profile - Reason - Location Edit Window

 

You would not be able to make any changes as the field is read only.

To Create Location

To create a new Location, click New Location tab on the Location List panel.

Profile Management - Crankback Profile - Reason - Location Fields

 

The Create New Location window is displayed.

Profile Management - Crankback Profile - Reason - Location Create Window

 

The following fields are displayed:

Location Parameters

ParameterDescription
Index

Identifies the target Crank Back entry.

Options are:

  • internationalNet – International network.
  • natReserved6 – Reserved
  • natReserved12 – Reserved
  • netBeyondInterPoint – Network beyond interworking point (BI).
  • privateLocal – Private network serving the local user (LPN).
  • privateRemote – Private network serving the remote user (RPN).
  • publicLocal – Public network serving the local user (LN).
  • publicRemote – Public network serving the remote user (RLN).
  • transitNet – Transit network (TN)
  • user

To Copy Location

To copy any of the created Location and to make any minor changes, click the radio button next to the specific Location to highlight the row.

Profile Management - Crankback Profile - Reason - Location Highlighted


 

Click Copy Location tab on the Location List panel.

Profile Management - Crankback Profile - Reason - Location Fields


 

The Copy Selected Location window is displayed along with the field details which can be edited.

Profile Management - Crankback Profile - Reason - Location Copy Window

 

Make the required changes to the required fields and click Save to save the changes. The copied Location is displayed at the bottom of the original Location in the Location List panel.

To Delete Location

To delete any of the created Location, click the radio button next to the specific Location which you want to delete.

Profile Management - Crankback Profile - Reason - Location Highlighted


 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Profile Management - Crankback Profile - Reason - Location Delete Confirmation

 

Click Yes to remove the specific Location from the list.

 

  • No labels