You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

In this section:

 

The criteria for recording calls using the Media Capture Tool (MCT) is configured in PSX and when a call meets the criteria, PSX indicates the need for media forking in the Policy Response to

Unable to show "metadata-from": No such page "_space_variables"
. This feature allows you to configure the Monitor Endpoint server where the captured media is sent.

Command Syntax

% set global monitorEndpoint mct <monitor endpoint name>
	ipAddress <intfc_ip_address>
	portNumber <sip_signaling_port_#>
	state <disabled|enabled>
	trunkGroup <TG_name>

Command Parameters

Global Monitor Endpoint Parameters

Parameter

Length/Range

Description

<monitor endpoint name>

1-23 charactersThe name of the Monitor endpoint.
ipAddressValid IP address

Logical IP address of the interface.

portNumber1-65535

<value> (default = 5060) – UDP/TCP port number of SIP signaling port.

stateN/A

Administrative state of MCT. Changes can only be made when state is disabled, and are applied upon next enable action.

  • disabled (default)
  • enabled

trunkGroup

1-23 characters

<trunkgroup name> – Name of trunk group used by MCT.


 

Command Example

% set global monitorEndpoint mct <MCT-1> ipAddress <10.22.33.44> portNumber <5060> state enabled> trunkGroup <SIPTX-EAST>

The command set global monitorTarget <TargetName> state <state> is available to users from the Administrator group only. Users from other groups are not be able to modify it.

  • No labels