For information on power connection requirements for the
Unable to show "metadata-from": No such page "_space_variables"
system, see Power Connection Requirements.The
Unable to show "metadata-from": No such page "_space_variables"
power supplies must be replaced with Ribbon-provided units only.Ribbon SBC 1000 Power Supply
Specifications
The
Unable to show "metadata-from": No such page "_space_variables"
system comes equipped with a single power supply which complies with the following specifications:Item | Specification |
|---|---|
Input Voltage | AC: 100-240 VAC Nominal, Auto-switching, 47-63 Hz |
AC Maximum Input Current | 1.25A at 115VAC and 0.63A at 230VAC |
AC Input Voltage Range (nominal) | 100-127VAC and 200-240VAC |
Output | +12V/10A |
Max Power Consumption | 144 |
LED Status Indicator
There are no visible Power Supply LEDs on the
Unable to show "metadata-from": No such page "_space_variables"
SBC 1000.Ribbon SBC 2000 Power Supply
Specifications
The
Unable to show "metadata-from": No such page "_space_variables"
system comes equipped with either a single power supply, or dual redundant power supplies which comply with the following specifications:Item | Specification |
|---|---|
Input Voltage | AC: 100-240 VAC Nominal, Auto-switching, 47-63 Hz |
AC Maximum Input Current | 5A at 115VAC and 2.5A at 230VAC |
AC Input Voltage Range (nominal) | 100-127VAC and 200-240VAC |
Output | 300 W-AC: +5V/20A, +12V/24A, -12V/0.6A, +3.3V/20A, +5VSB/3A |
Max Power Consumption | 300 watts |
The
Unable to show "metadata-from": No such page "_space_variables"
power supplies, if equipped with dual supplies, are hot swappable. Note that this only applies to the SBC 2000 and only when two power supplies are installed in the redundant mode.LED Status Indicator
The
Unable to show "metadata-from": No such page "_space_variables"
power supplies include a LED status indicator on the back of the unit. The following table explains the meaning of the various LED Status states.LED Status | Power Supply Status Description |
|---|---|
Solid Green | Normal (AC on, DC power on) |
Blinking Green | Standby (AC on, DC standby on, DC power off) power to the Unable to show "metadata-from": No such page "_space_variables" SBC 1000/2000 main board is off |
Solid Red | Alarm Condition |
Blinking Red | Fan Failure |
Off | AC Failure |
Safety Requirements
The
Unable to show "metadata-from": No such page "_space_variables"
power supplies are tested and certified to meet UL / cUL / IEC 60950-1 safety requirements.
Overview
Content Tools