In this section:
Call capacity is limited to X calls per second when Info level logging is enabled. Additional logging verbosity reduces the call capacity.
Although the call setup rate is 10 calls per second, if Call Admission Control (CAC) is enabled, calls over the rate limit will be rejected with the message 480 Temporary Not Available.
The SBC SWe Lite supports the following maximum configuration.
The
Any SIP ↔ SIP call consumes a single SIP session, for the life of the call, within the pool of SIP sessions that have been activated through a license submission..
No SIP session is consumed from the pool of licensed SIP sessions when a SIP ↔ SIP call has on any one leg any one of the following devices:
You do not need to purchase a license for these SIP ↔ SIP calls because the
If multiple calls arrive simultaneously, the
Turning on the CAC or logs could exacerbate this issue.
Maximum number of SIP ↔ SIP sessions | 100 |
Maximum number of RTP ↔ RTP sessions (direct media or RTP | 100 |
Maximum number of transcode sessions (G.711 μ G.729) | 25 |
Call Setup – Maximum call setup rate | 10 cps |
Registrations – Maximum number of registered users | 1,000 |
Encryption – Maximum number of TLS-encrypted SIP sessions | 100 |
Encryption – Maximum number of RTP ↔ SRTP sessions | 25 |
Encryption – Maximum number of SRTP ↔ SRTP sessions (direct media or RTP proxy mode) | 100 |
• Supported codecs (including for transcode operations): G.711, G.722, G.722.2 (AMR-WB), G.723.1 (5.3 kbps, 6.3 kbps), G.726 (32 kbps), G.729A/B (8 kbps)
• DTMF/RFC4733; Inband DTMF; SIP INFO/RFC-2833
• Voice Activity Detection (VAD)
• G.168 Echo Cancellation with standard 128 ms tail length