You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

IMPORTANT

The Transparency Profile is the recommended method of configuring transparency on the SBC Core for new deployments as well as when applying additional transparency configurations to existing deployments. Do not use IP Signaling Profile flags in these scenarios because the flags will be retired in upcoming releases.

Refer to the SBC SIP Transparency Implementation Guide for additional information.

To configure downstream forking with dialog transparency, use the steps below:

  1. Enable dialogTransparency on both ingress and egress Zones:

    set addressContext <ingress_ac_name> zone <ingress_zone_name> dialogTransparency enabled
    set addressContext <egress_ac_name> zone <egress_zone_name> dialogTransparency enabled
    commit
  2. Enable downstreamForkingSupport on the egress Trunk Group and set forkingBehaviour to "lastProvResponse":

    set addressContext <egress_ac_name> zone <egress_zone_name> sipTrunkGroup <egress_tg_name> downstreamForkingSupport enable
    set addressContext <egress_ac_name> zone <egress_zone_name> sipTrunkGroup <egress_tg_name> media earlyMedia forkingBehaviour lastProvResponse
    commit

Note

The SBC exposes multiple early dialogs on the ingress if multiple early dialogs are present on the egress due to downstream forking.

 

  • No labels