You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

This object creates a DTMF profile, which maps one or more digit key sequences to actions and associated scripts for take back and transfer features such as blind transfer, consultative transfer, and conference and transfer.

To View and Edit DTMF

On SBC main screen, go to Configuration > Profile Management > Category: Media Profiles > Codec Entry > DTMF.

Select the desired Codec Entry from the drop-down list to view its respective DTMF parameters.

The DTMF window is displayed.

Profile Management - Media Profiles - Codec Entry - Dtmf

The following fields are displayed:

Codec Entry - DTMF Parameters

Parameter

Description

Relay

The possible values are:

  • none—Leaves the DTMF tones in-band as encoded audio.
  • outOfBand—Applies to
    Unable to show "metadata-from": No such page "_space_variables"
    -to-SIP or
    Unable to show "metadata-from": No such page "_space_variables"
    -to-H.323. Carries DTMF in the signaling protocol.
  • rfc2833—Applies to
    Unable to show "metadata-from": No such page "_space_variables"
    -to-SIP,
    Unable to show "metadata-from": No such page "_space_variables"
    -to-H.323, or
    Unable to show "metadata-from": No such page "_space_variables"
    -to-
    Unable to show "metadata-from": No such page "_space_variables"
    . Encodes DTMF into RTP using a format and payload type distinct from the audio encoding.
  • eitherOoBOrRfc2833—Out-of-Band and RFC 2833 are equally received and only one is transmitted. The one transmitted is the one preferred by the peer or RFC 2833 as the default.o
  • bothOoBAnd2833—Out-of-Band and RFC 2883 are equally received and both can be transmitted. This option would normally be used only in the case where the OOB DTMF signaling is absorbed and not regenerated. For example, the OOB DTMF might go to an application server that needs to detect the DTMF for control purposes but does not process RTP and the 2833 DTMF would go to the destination media address as part of the RTP stream.

The default setting is None.

Remove Digits

Enables the removal of DTMF digits from the media stream. This applies only if DTMF relay is configured as Out-of-Band or RFC 2833. The default setting is Enabled.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels