You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

In this section:

The Cdr Server Admin allows you to configure SBC accounting and to transfer files to external CDR server.

Admin List

To view the list of Cdr Server Admins, on SBC main screen, go to Administration > Accounting and Logs > Cdr Server > Admin. The Admin window of Cdr Server is displayed.

Cdr Server - Admin List Window

 

To edit any specific Admin details, click the radio button of the required Admin name. The Edit Selected Admin window appears:

Cdr Server - Edit Selected Admin

 

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To add new Admin, Click New Admin on the Admin panel. The Create New Admin window appears:

Cdr Server - Create New Admin

 

The fields displayed are:

CDR Server - Create/Edit Admin

 

Parameter

Description

Type

Select one of the following:

  • Primary
  • Secondary

IP Address V4 or V6

The IP Address of the external CDR server. The following IP address types are supported:

  • IPv4—This is V4 IP address in dotted decimal form (for example 128.127.50.224).
  • IPv6—This is V6 IP address in hexadecimal/colon form (for example, 1280:1276:3350:2224:2222:3333:8888:1245 or fd00:21:445:128::7880).
CDR PortSpecifies the SSH port number of the remote server. The value ranges from 1 to 65535 and the default value is 22.
Use Ssh Key File

Enable this parameter to use SSH public key for authenticating the remote CDR server.

 
  • disable (default)
  • enable

Username

Specifies the remote username.

Password

Specifies the remote server password.

You can enter password in non-echo mode when prompted and not inline.

Path

Specifies the remote directory path where the files should be transferred.

File Prefix

Specifies the remote file prefix that is used to form the remote file.
This prefix will be appended with a date stamp and sequence number once transferred.

Connection Timeout

The time to wait before timing out the connect operation. The values ranges between 15 and 600.

Transfer Timeout

The time to wait before timing out the file transfer. The values ranges between 15 and 600.

Buffer SizeSpecifies the buffer size for the new admins created. The value ranges from 4 to 1024 and the default value is 1024.

Admin Commands

For every Admin created for Cdr Server, There are Admin Commands created.

Cdr Server - Admin Commands

 

The following options are displayed:

CDR Server - Admin Commands

 

Parameter

Description

Force Current Server

Use this request parameter to forcibly set the specified server as the current server.
Generate Ssh Public KeysUse this request parameter to generate the SSH public key to authenticate the remote CDR servers.
Reset Cdr Server StatsUse this request parameter to reset the CDR server statistics.

Admin Command Execution (forceCurrentServer)

  1. Choose forceCurrentServer to set the specified server as current server.
  2. Click Select. A pop up window displays the selected command.

    Cdr Server - Admin Commands (forceCurrentServer)

     

  3. Click forceCurrentServer button to proceed or Click Delete to exit the window.
  4. The action concludes with the result.

    Cdr Server - Admin Commands Success

     

  5. Click OK to Complete.

Admin Command Execution (generateSshPublicKeys)

  1. Choose generateSshPublicKeys to generate SSH Publick Keys for remote servers.
  2. Click Select. A pop up window displays the selected command.

    Admin Commands (generateSshPublicKeys)

  3. Click generateSshPublicKeys button to proceed or click Delete to exit the window.
  4. The action concludes with the result.

    Admin Command Success

  5. Click Ok to complete.

Admin Command Execution (resetCdrServerStats)

  1. Choose resetCdrServerStats to reset the CDR server statistics.
  2. Click Select. A pop up window displays the selected command.

    Cdr Server - Admin Commands (resetCdrServerStats)

     

  3. Click resetCdrServerStats button to proceed or Click Delete to exit the window.
  4. The action concludes with the result.

    Cdr Server - Admin Commands Success

     

  5. Click OK to complete.

 

  • No labels