You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

 

P-Sig-Info is a Sonus proprietary header used to transport various signaling parameters like SGD (Super Generic Digits), UUI (User-to-User Information), Contractor Number, etc. in SIP-I to SIP interworking cases.

The interworking of SGD parameter and SIP P-Sig-Info header is not applicable when the
Unable to show "metadata-from": No such page "_space_variables"
is configured for ERE mode.

The CLI syntax to map various signaling parameters to the P-Sig-Info header is shown below:

  • Map the UUI parameter into the SIP P-Sig-Info header.

    % set profiles signaling ipSignalingProfile <SIP profile name> commonIpAttributes flags mapUuiInPSigInfoHeade enable

  • Map the Contractor Number parameter into the outgoing SIP P-Sig-Info header.

    % set profiles signaling ipSignalingProfile <SIP profile name> egressIpAttributes flags mapContractorNumberInPSigInfoHeader enable

  • Map Called Party Category parameter to outgoing SIP P-Sig-Info header.

    % set profiles signaling ipSignalingProfile <SIP profile name> ingressIpAttributes flags mapCalledPartyCategoryInPSigInfoHeader enable

References:

Refer to the following pages for configuration details:

 

  • No labels