You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
Use this object to configure Policy data for this SIP Trunk Group.
As a best practice, always use UPPERCASE for trunk group names.
Command Syntax
% set addressContext <name> zone <name> sipTrunkGroup <name> policy
callRouting elementRoutingPriority <ERP profile name>
carrier <serving carrier code>
country <country code>
digitParameterHandling
egressDmPmRule <rule>
ingressDmPmRule <rule>
numberingPlan <numbering plan>
featureControlProfile <profile name>
ingress
flags
hdPreferredRouting <disable | enable>
hdSupportedRouting <disable | enable>
nonZeroVideoBandwidthBasedRoutingForH323 <disable | enable>
nonZeroVideoBandwidthBasedRoutingForSip <disable | enable>
ipSignalingPeerGroup <name>
localizationVariant <generic | japan | northAmerica>
media <packetServiceProfile | toneAndAnnouncementProfile>
services classOfService <COS profile name>
signaling
ipSignalingProfile <profile name>
signalingProfile <profile name>
sipDomain <domain name>
tgIPVersionPreference <both-ipv4-and-ipv6 | ipv4-only | ipv6-only>
Command Parameters
SIP Trunk Group Policy Parameters
Parameter | Length/Range | Description |
---|
callRouting | N/A | Route a call or request to the next-hop entity.elementRoutingPriority – Element Routing Priority Profile name.
|
carrier | N/A | The serving carrier code. |
country | N/A | The serving country code. |
digitParameterHandling | N/A | Use this object to specify digit parameter handling for this trunk group for this trunk group. |
featureControlProfile
| N/A | The name of the Feature Control Profile to associate with this trunk group.
The featureControlProfile associated with this sipTrunkGroup can be replaced with a different featureControlProfile , if desired. However, deleting a featureControlProfile from a sipTrunkGroup object can cause call failures.
|
ingress flags
| N/A | Use this parameter to configure the following route prioritization flags for this ingress trunk group.
The ingress parameter does not display until at least one trunk group is created.
hdPreferredRouting – Enable flag on ingress trunk group to use PSX HD Preferred Routing strategy.
disable (default)enable
When this flag is enabled, the "nonZeroVideoBandwidthBasedRouting ..." flags are disabled. Do not use this flag on Egress trunk groups.
hdSupportedRouting – Enable flag on ingress trunk group to use PSX HD Supported Routing strategy.
disable (default)enable
When this flag is enabled, the "nonZeroVideoBandwidthBasedRouting ..." flags are disabled. Do not use this flag on Egress trunk groups.
nonZeroVideoBandwidthBasedRoutingForH323 – Enable this flag on ingress trunk group to give priority to routes with non-zero video bandwidth in H.323 video calls.nonZeroVideoBandwidthBasedRoutingForSip – Enable this flag on ingress trunk group to give priority to routes with non-zero video bandwidth in SIP video calls.
|
ipSignalingPeerGroup | N/A | The name of the IP Signaling Peer Group to associate with this trunk group. |
localizationVariant | N/A | Specifies the parameters and controls used for localization variant for this trunk group. generic japan northAmerica
|
media | N/A | Select the profile associated with media policy for this SIP trunk group. packetServiceProfile toneAndAnnouncementProfile
|
services | N/A | The service associated with various enhanced services and features for this SIP trunk group. classOfService <CoS profile name>
|
signaling | N/A | Identifies the parameters controlling the specifics of the SIP signaling for this SIP trunk group. ipSignalingProfile – IP Signaling Profile name.signalingProfile – Signaling Profile name.
|
sipDomain | N/A | The domain string used when SIP signaling requires a configured domain name. |
tgIPVersionPreference | N/A | Use this flag to choose the IP address preference on the ingress Trunk Group. both-ipv4-and-ipv6 (default)
ipv4-only ipv6-only
|