You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to All

Back to All - Address Context

Back to Address Context - Zone

Back to Zone - Gw Trunk Group

Additional section:

This object is used to specify the profile, which is associated with media policy for the specified Gw Trunk Group.

To View and Edit Media

On SBC main screen, navigate to All > Address Context > Zone > Gw Trunk Group > Media.

The Media can be checked for each Address Context, Zone, and Gw Trunk Group or for all the Address Contexts, Zones, and Gw Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone, and Gw Trunk Group.

The Media window is displayed.

All - Address Context - Zone - Gw Trunk Group - Media

 

The following fields are displayed:

Media Parameters

ParameterDescription

Media IP Interface Group Name

Interface group to be used for media.

Source Address  Filtering

If enabled, filter out incoming media packets which do not match the expected source IP address and UDP port.

Direct Media Allowed

Specifies whether to enable the direct-media path so that media flows directly between endpoints in the same direct-media group or not. The options are:

  • disabled (default)
  • enabled

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels