You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to Configuration

Back to Configuration - Profile Management

Back to Profile Management - Signaling Profiles

Back to Signaling Profiles - Signaling Profile

Back to Signaling Profile - Egress - Profile Management

Additional section:

Use this object to control UK ISUP parameters.

To View and Edit Uk Isup

On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Uk Isup.

Select the desired Signaling Profile from the drop-down list to view its respective Uk Isup parameters.

The Uk Isup window is displayed.

Signaling Profiles - Signaling Profile - Egrees - Uk Isup

 

The following fields are displayed:

Signaling Profile - Egress - Uk Isup parameters

Parameter Description
Nfci Link To Link Routing Control Indicator

Controls the Link-To-Link Routing Control Indicator value. The options are:

  • Alt Rt Allowed Cont Relay Allowed:Select to allow alternate routes and continuous retries.
  • Alt Rt Allowed Cont Relay Barred: Select to allow alternate routes but bar continuous retries.
  • Alt Rt Barred Cont Retry Allowed: Select to bar alternate routes but allow continuous retries.
  • Alt Rt Barred Cont Retry Barred: Select to bar both alternate routes and continuous retries.
  • Alt Rt Once Cont Retry Allowed: Select to allow alternate route once and allow continuous retries.
  • Alt Rt Once Cont Retry Barred: Select to allow alternate route once but to bar continuous retries.
  • none

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

 

  • No labels