The BMC web application allows provisioning primary and secondary host management interfaces. When the host management interfaces are configured, a direct link from BMC is enabled to the EMA for installing and upgrading the
Unable to show "metadata-from": No such page "_space_variables"
application.Use the following procedure to configure the primary and secondary host management interfaces:
Log on to SBC BMC GUI using the IP address configured in the previous section.
username: root password: superuser
The BMC Main Screen appears:BMC Main Screen
Click Configuration > Platform Management Network tab. The Platform Management Network Settings screen is displayed.
BMC Platform Management Network Settings Window
A message appears to enter the management IP addresses for the first time installation.
BMC PMNS Info Message
- Click OK.
- Configure the following network settings for all the four management interfaces from 0 to 3.
- IPv4 Address or/and IPv6 Address
- Prefix
- Default Gateway
BMC Platform Management Network Settings Window
- Click Save.
If you are updating a new Management IP address through BMC and click Save, reinstall the SBC application software (see the message appears in the below figure). Updating management IP using CLI/EMS/EMA will get updated automatically in BMC and re-installation is not required.
BMC Warning Message
Overview
Content Tools