You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

 

Applies to SWe LIte only. For SBC Edge 1000/2000, refer to Managing VLANs - SBC Edge 1000-2000.

For the

Unable to show "metadata-from": No such page "_space_variables"
,  VLAN sub-interfaces allows the separation of either management traffic between the service provider and the customer, or to keep media traffic from multiple sources separate (that need to exist on the same SWe Lite instance). For example, a service provider could use a VLAN to manage a SWe Lite at a customer premise, while also having a management interface for the customer; the service provider and the customer would be on the same physical network, but have separate logical interfaces.

When a VLAN sub-interface is configured, any IP traffic that uses that sub-interface will be VLAN tagged with the configured value.

VLAN sub-interfaces behave the same as any other Logical Interface, and are used for transporting VOIP media packets (e.g. RTP, SRTP), protocol packets (e.g. SIP, RTCP, TLS), and/or dynamic routing.

Configuration for each VLAN sub-interface is identical to the main interfaces (except the VLAN value is used to specify the interface as a sub-interface).

Working with VLANs

  1. In the WebUI, click the Settings tab.In the left navigation pane, go to Network Interfaces > Logical Interfaces.
  2. In the left navigation pane, go to Network Interfaces > Logical Interfaces. 

    $param1

To view VLAN properties:

  1. Click the pop-up icon () next to the entry you want to view.
  2. When you are finished, close the window.

To delete an entry, select the checkbox next to the entry and then click the Delete () icon.

  • No labels