You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Sonus SBC 1000

The

Unable to show "metadata-from": No such page "_space_variables"
has three Ethernet ports used for communicating with the IP network. All SIP traffic is carried on these two ports. Unlike the SBC 2000, this model has no dedicated Management Port.

The third Ethernet port on the SBC 1000 is available only if running SBC 1000 v2 hardware. For hardware details, see Sonus SBC 1000 Hardware Specifications.

Sonus SBC 2000

The

Unable to show "metadata-from": No such page "_space_variables"
has four Ethernet ports and one Ethernet Management port. By default, each of the four non-management ports are in their own system created VLAN, and are isolated from one another.

ASM

If the unit is equipped with a built-in ASM, all ASM traffic is carried uniquely through this Ethernet port.

For communication between the

Unable to show "metadata-from": No such page "_space_variables"
and the ASM to work properly, the ASM port's Default Untagged VLAN must be set to a VLAN whose logical IP address is in the same subnet as the ASM's IP address. For example, if the ASM port's default VLAN is set to Ethernet 1 VLAN, then the logical interface Ethernet 1 IP must have its IP address in the same subnet as the ASM IP.

Working with Ethernet Ports:

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to Node Interfaces > Ports. See below for examples.

 

SBC 1000 - Ports

Ethernet Ports - SBC 1000 Example

SBC 2000 - Ports

Ethernet Ports - SBC 2000 Example

 

To view a Ethernet Port's properties:

  1. Click the pop-up icon () next to the entry you want to view.
  2. When you are finished, close the window.

To delete an entry, select the checkbox next to the entry and then click the Delete () icon.

See also, Viewing Port Counters and Channel Details,

  • No labels