Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Column
width40%
Table of Contents
Panel

Table of Contents
maxLevel4

Column
width5%

 

Column
width55%

Add_workflow_for_appnotes
AUTH2kharbutUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8405ed, userName='null'}
AUTH1idameskiUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd6e0a07, userName='null'}
JIRAIDAUTHIOT-88
REV6bscogginsUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
REV4kharbutUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8405ed, userName='null'}
REV1ggistUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cdec0ad3, userName='null'}

Pagebreak
 

Document Overview

This document provides a configuration guide for Sonus SBC 5xx0 Series (Session Border Controller) when connecting to Lync 2013 and Telus SIP Trunk.

This configuration guide supports s features given in Lync 2013 configuration guides.

...

Caption
0Figure
1Connectivity Between Third-Party and Sonus SBC 5XX0
3Connectivity Between Third-Party and Sonus SBC 5XX0

Image RemovedImage Added

Noprint

Back to Top

Support

 

For any questions regarding this document or the content herein, please contact your maintenance and support provider.

Technical support on Sonus SBC 5xx0 can be obtained through the following:

  • Phone:   (978) 614-8589  or (888) 391-3434 (Toll-free)
    • Web:    http://sonusnetworks.force.com/PortalLoginPage

    Third-party Product Features

    The testing was executed with the Telus test plan, and the following features were tested for PSTN, BVOIP and Mobile clients:

    • Basic originated and terminated calls 
    • Basic inbound/outbound call 
    • Basic inbound/outbound call with privacy 
    • Hold and resume 
    • Call Transfer (Blind transfer)
    • Call Transfer (Consult transfer)
    • Call Forwarding Unconditional 
    • Call Forwarding Busy
    • Call Forwarding Don’t Answer
    • Voicemail 
    • Conference call 
    • Long calls
    • FAX 
    • DTMF

    Verify License

     SBC-POL-RTU

     
    Noprint

    Back to Top

    Lync 2013 Configuration

    The following new configurations are included in this section:

    1. PSTN Gateway
    2. Route

    Anchor
    PSTN Gateway
    PSTN Gateway
    1. PSTN Gateway

    Topology Builder > Shared Components > PSTN Gateways

     

    Caption
    0Figure
    1Define a new IP/PSTN Gateway
    3Define a new IP/PSTN Gateway

    Image Modified

     

    Noprint

    Back to Top

      

    Caption
    0Figure
    1Define FQDN
    3Define FQDN

    Image Modified

    Noprint

    Back to Top

      

    Caption
    0Figure
    1Define IP Address
    3Define IP Address

    Image Modified

    Noprint

    Back to Top

      

    Caption
    0Figure
    1Define Root Trunk
    3Define Root Trunk

    Image Modified

    Noprint

    Back to Top

     

    Anchor
    Route
    Route
    2. Route

    Control Panel > Voice Routing > Route 

    Caption
    0Figure
    1Edit Voice Route
    3Edit Voice Route

    Image Modified 

    Image Modified

     

    Noprint

    Back to Top

     

    Pagebreak

    Sonus SBC 5xx0 Series Configuration

     

    Code Block
    languagenone
    titleComplete Configuration
    collapsetrue
    configure
#UDP Port Range for RTP (media)
set system media mediaPortRange baseUdpPort 1024 maxUdpPort 65148
commit
#DSP Resources
set system mediaProfile compression 90 tone 10
commit
#SMM Profiles
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 criterion 1 type message
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 criterion 1 message messageTypes request methodTypes invite
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 criterion 2 type header
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 criterion 2 header name REFERRED-BY condition exist hdrInstance one
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 criterion 3 type token
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 criterion 3 token condition regex-match tokenType uriusername
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 criterion 3 token regexp string ^\+1.*$
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 action 1 type token operation regdel
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 action 1 regexp string ^\+1
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 action 1 to type token tokenValue uriusername
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 1 applyMatchHeader one
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 criterion 1 type message
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 criterion 1 message messageTypes request methodTypes invite
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 criterion 2 type header
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 criterion 2 header name REFERRED-BY condition exist hdrInstance one
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 action 1 type header operation store headerInfo fieldValue
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 action 1 from type header value REFERRED-BY
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 action 1 to type variable variableValue var1 variableScopeValue local
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 action 2 type header operation add headerPosition last
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 action 2 from type variable variableValue var1
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 action 2 to type header value Diversion
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 2 applyMatchHeader one
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 3 criterion 1 type message
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 3 criterion 1 message messageTypes request methodTypes register
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 3 criterion 2 type header
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 3 criterion 2 header name To condition exist
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 3 action 1 type header operation regsub
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 3 action 1 from type value value fe.lync2013.sonusnet.com
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 3 action 1 regexp string 10.35.180.136 matchInstance all
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 3 action 1 to type header value To
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 3 applyMatchHeader one
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 criterion 1 type message
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 criterion 1 message messageTypes request methodTypes invite condition exist
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 criterion 2 type messageBody
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 criterion 2 messageBody condition exist messageBodyType all
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 criterion 2 messageBody regexp numMatch match
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 action 1 type messageBody operation regsub
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 action 1 from type value
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 action 1 regexp string 13 matchInstance all
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 action 1 to type messageBody messageBodyValue all
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 action 2 to type messageBody messageBodyValue all
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 action 2 type messageBody operation regdel
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 action 2 regexp string a=rtpmap:13 CN/8000[^\r\n]*\r\n matchInstance all
set profiles signaling sipAdaptorProfile LYNC_INBOUND rule 4 applyMatchHeader one
set profiles signaling sipAdaptorProfile LYNC_INBOUND state enabled
commit
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 criterion 1 type message
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 criterion 1 message messageTypes request methodTypes invite
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 criterion 2 type header
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 criterion 2 header name Diversion condition exist hdrInstance one
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 criterion 3 type token
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 criterion 3 token condition regex-match tokenType uriusername
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 criterion 3 token regexp string ^\+1.*$
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 action 1 type token operation regdel
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 action 1 regexp string ^\+1
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 action 1 to type token tokenValue uriusername
set profiles signaling sipAdaptorProfile DiversionToPAID rule 1 applyMatchHeader one
set profiles signaling sipAdaptorProfile DiversionToPAID rule 2 criterion 1 type message
set profiles signaling sipAdaptorProfile DiversionToPAID rule 2 criterion 1 message messageTypes request methodTypes invite
set profiles signaling sipAdaptorProfile DiversionToPAID rule 2 criterion 2 type header
set profiles signaling sipAdaptorProfile DiversionToPAID rule 2 criterion 2 header name Diversion condition exist hdrInstance one
set profiles signaling sipAdaptorProfile DiversionToPAID rule 2 action 1 type header operation store headerInfo fieldValue
set profiles signaling sipAdaptorProfile DiversionToPAID rule 2 action 1 from type header value Diversion
set profiles signaling sipAdaptorProfile DiversionToPAID rule 2 action 1 to type variable variableValue var2 variableScopeValue local
set profiles signaling sipAdaptorProfile DiversionToPAID rule 2 applyMatchHeader one
set profiles signaling sipAdaptorProfile DiversionToPAID rule 3 criterion 1 type message
set profiles signaling sipAdaptorProfile DiversionToPAID rule 3 criterion 1 message messageTypes request methodTypes invite
set profiles signaling sipAdaptorProfile DiversionToPAID rule 3 criterion 2 type header
set profiles signaling sipAdaptorProfile DiversionToPAID rule 3 criterion 2 header name P-Asserted-Identity condition exist hdrInstance one
set profiles signaling sipAdaptorProfile DiversionToPAID rule 3 action 1 type header operation modify headerInfo headerValue
set profiles signaling sipAdaptorProfile DiversionToPAID rule 3 action 1 from type variable variableValue var2
set profiles signaling sipAdaptorProfile DiversionToPAID rule 3 action 1 to type header value P-Asserted-Identity
set profiles signaling sipAdaptorProfile DiversionToPAID rule 3 applyMatchHeader one
set profiles signaling sipAdaptorProfile DiversionToPAID rule 4 criterion 1 type message
set profiles signaling sipAdaptorProfile DiversionToPAID rule 4 criterion 1 message messageTypes request methodTypes invite
set profiles signaling sipAdaptorProfile DiversionToPAID rule 4 criterion 2 type header
set profiles signaling sipAdaptorProfile DiversionToPAID rule 4 criterion 2 header name Diversion condition exist
set profiles signaling sipAdaptorProfile DiversionToPAID rule 4 action 1 type header operation delete
set profiles signaling sipAdaptorProfile DiversionToPAID rule 4 action 1 to type header value Diversion
set profiles signaling sipAdaptorProfile DiversionToPAID rule 4 applyMatchHeader one
set profiles signaling sipAdaptorProfile DiversionToPAID state enabled
commit
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 1 criterion 1 type message
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 1 criterion 1 message messageTypes request methodTypes options
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 1 criterion 2 type header
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 1 criterion 2 header name Max-Forwards condition exist
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 1 action 1 type header operation modify headerInfo headerValue
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 1 action 1 from type value value 0
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 1 action 1 to type header value Max-Forwards
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 1 applyMatchHeader one
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 2 criterion 1 type message
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 2 criterion 1 message messageTypes request methodTypes update
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 2 action 1 type messageBody operation regdel
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 2 action 1 regexp string a=T38.*$ matchInstance all
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 2 action 1 to type messageBody messageBodyValue all
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 2 action 2 type messageBody operation regdel
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 2 action 2 regexp string m=image.*$
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 2 action 2 to type messageBody messageBodyValue all
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM rule 2 applyMatchHeader all
set profiles signaling sipAdaptorProfile TELUS_INBOUND_SMM state enabled
commit
#Lync codecs
set profiles media codecEntry LYNC_G711U_SS_20ms_2833 codec g711ss packetSize 20 preferredRtpPayloadType 128 law ULaw sendSid enable
set profiles media codecEntry LYNC_G711A_SS_20ms_2833 codec g711ss packetSize 20 preferredRtpPayloadType 128 law ALaw sendSid enable
set profiles media codecEntry LYNC_G711U_SS_20ms_2833 dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry LYNC_G711A_SS_20ms_2833 dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry LYNC_G711U_SS_20ms_2833 fax failureHandling continue toneTreatment none
set profiles media codecEntry LYNC_G711A_SS_20ms_2833 fax failureHandling continue toneTreatment none
set profiles media codecEntry LYNC_G711U_SS_20ms_2833 modem failureHandling continue toneTreatment none
set profiles media codecEntry LYNC_G711A_SS_20ms_2833 modem failureHandling continue toneTreatment none
commit
#Telus codecs
set profiles media codecEntry TELUS-G729A-2833-T38 codec g729a packetSize 20 preferredRtpPayloadType 128
set profiles media codecEntry TELUS_G711A_SS_2833_T38 codec g711ss packetSize 20 preferredRtpPayloadType 128 law ALaw sendSid enable
set profiles media codecEntry TELUS_G711U_SS_2833_T38 codec g711ss packetSize 20 preferredRtpPayloadType 128 law ULaw sendSid enable
set profiles media codecEntry TELUS_G711A_SS_2833_T38 dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry TELUS-G729A-2833-T38 dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry TELUS_G711U_SS_2833_T38 dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry TELUS_G711U_SS_2833_T38 fax failureHandling continue toneTreatment faxRelay
set profiles media codecEntry TELUS_G711A_SS_2833_T38 fax failureHandling continue toneTreatment faxRelay
set profiles media codecEntry TELUS-G729A-2833-T38 fax failureHandling continue toneTreatment faxRelay
set profiles media codecEntry TELUS_G711U_SS_2833_T38 modem failureHandling continue toneTreatment applyFaxTreatment
set profiles media codecEntry TELUS-G729A-2833-T38 modem failureHandling continue toneTreatment applyFaxTreatment
set profiles media codecEntry TELUS_G711A_SS_2833_T38 modem failureHandling continue toneTreatment applyFaxTreatment
commit
#DNS entry
set addressContext default dnsGroup DNS localRecord LYNC2013 hostName fe.lync2013.sonusnet.com state enabled order priority
set addressContext default dnsGroup DNS localRecord LYNC2013 data 1 type a priority 0 ipAddress 10.35.180.136 state enabled
commit
#Internal Side Configuration
#IP Interface Group
set addressContext default ipInterfaceGroup TRUSTED ipInterface pkt0 ceName little portName pkt0 ipAddress 10.35.177.246 prefix 26 mode outOfService state disabled
commit
set addressContext default ipInterfaceGroup TRUSTED ipInterface pkt0 mode inService state enabled
commit
#IP Static Route
set addressContext default staticRoute 0.0.0.0 0 10.35.177.193 TRUSTED pkt0 preference 100
commit
#Assign DNS group to zone
set addressContext default zone TRUSTED dnsGroup DNS
commit
#SBC Configuration for Lync 2013 Trunk
#Packet Service Profile (PSP)
set profiles media packetServiceProfile LYNC_PSP codec codecEntry1 LYNC_G711U_SS_20ms_2833 codecEntry2 LYNC_G711A_SS_20ms_2833
set profiles media packetServiceProfile LYNC_PSP packetToPacketControl codecsAllowedForTranscoding thisLeg g711a g711u g729 otherLeg g711a g711u g729
set profiles media packetServiceProfile LYNC_PSP packetToPacketControl conditionsInAdditionToNoCommonCodec applyFaxToneTreatment disable differentDtmfRelay enable differentPacketSize enable differentSilenceSuppression enable honorOfferPreference disable honorAnswerPreference disable different2833PayloadType enable
set profiles media packetServiceProfile LYNC_PSP packetToPacketControl transcode conditional
commit
#IP Signaling profiles
set profiles signaling ipSignalingProfile LYNC_IPSP ipProtocolType sipOnly
set profiles signaling ipSignalingProfile LYNC_IPSP commonIpAttributes flags disableMediaLockDown enable includeReasonHeader enable
set profiles signaling ipSignalingProfile LYNC_IPSP commonIpAttributes flags minimizeRelayingOfMediaChangesFromOtherCallLegAll enable publishIPInHoldSDP enable routeUsingRecvdFqdn enable sendPtimeInSdp enable
set profiles signaling ipSignalingProfile LYNC_IPSP commonIpAttributes flags sendRtcpPortInSdp enable storePChargingVector enable
set profiles signaling ipSignalingProfile LYNC_IPSP commonIpAttributes optionTagInRequireHeader suppressReplaceTag enable
set profiles signaling ipSignalingProfile LYNC_IPSP ingressIpAttributes flags sendSdpIn200OkIf18xReliable enable sendSdpInSubsequent18x enable
set profiles signaling ipSignalingProfile LYNC_IPSP egressIpAttributes useLowerCaseDomainNames enable useSipDomainNameInFromField enable useSipDomainNameInRequestUri enable
set profiles signaling ipSignalingProfile LYNC_IPSP egressIpAttributes flags disable2806Compliance enable
set profiles signaling ipSignalingProfile LYNC_IPSP egressIpAttributes privacy flags includePrivacy enable msLyncPrivacySupport enable 
set profiles signaling ipSignalingProfile LYNC_IPSP egressIpAttributes privacy transparency disable privacyInformation pAssertedId
set profiles signaling ipSignalingProfile LYNC_IPSP egressIpAttributes transport type1 tcp type2 none type3 none type4 none
set profiles signaling ipSignalingProfile LYNC_IPSP egressIpAttributes numberGlobalizationProfile LYNC2013
commit
#Feature Control Profile
set profiles featureControlProfile LYNC_FCP processDestinationTgrp disable processDestinationTrunkContext disable processEnumdi disable
set profiles featureControlProfile LYNC_FCP ipProtocolFlags useIpProtocol enable defaultCalledUser enable honorPhoneContextParameter disable
commit
#zone
set addressContext default zone TRUSTED id 3 
commit
#SIP signaling port
set addressContext default zone TRUSTED sipSigPort 3 ipInterfaceGroupName TRUSTED ipAddressV4 10.35.177.247 portNumber 5060 mode outOfService state disabled siprec disabled transportProtocolsAllowed sip-udp sip-tcp
set addressContext default zone TRUSTED sipSigPort 3 mode inService state enabled
commit
#IP Peer
set addressContext default zone TRUSTED ipPeer LYNC2013-FQDN policy sip fqdnPort 0
set addressContext default zone TRUSTED ipPeer LYNC2013-FQDN ipAddress 10.35.180.136 ipPort 5068
set addressContext default zone TRUSTED ipPeer LYNC2013-FQDN pathCheck profile Lync2013 hostName fe.lync2013.sonusnet.com hostPort 5068 state disabled
set addressContext default zone TRUSTED ipPeer LYNC2013-FQDN policy description LYNC2013 packetServiceProfile LYNC_PSP ipSignalingProfile LYNC_IPSP
set addressContext default zone TRUSTED ipPeer LYNC2013-FQDN authentication incInternalCredentials enabled
set addressContext default zone TRUSTED ipPeer LYNC2013-FQDN authentication intChallengeResponse enabled
set addressContext default zone TRUSTED ipPeer LYNC2013-FQDN surrogateRegistration userPart p5872330304 authUserName p5872330304 regAuthPassword pana12345 state enabled sendCredentials challengeForAnyMessageAndInDialogRequests hostPart ipinet3.com
commit
#SIP trunk group
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 media mediaIpInterfaceGroupName TRUSTED
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 signaling messageManipulation inputAdapterProfile LYNC_INBOUND includeAppHdrs disabled
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 signaling rel100Support enabled acceptHistoryInfo enabled
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 ingressIpPrefix 10.35.180.136 32
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 policy callRouting elementRoutingPriority TELUS
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 policy digitParameterHandling numberingPlan GENERIC_NUM_PLAN
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 policy media packetServiceProfile LYNC_PSP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 policy services classOfService DEFAULT_IP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 policy signaling ipSignalingProfile LYNC_IPSP signalingProfile DEFAULT_IP_PROFILE
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 policy carrier 0000 country 1 sipDomain FE.LYNC2013.SONUSNET.COM localizationVariant northAmerica tgIPVersionPreference both-ipv4-and-ipv6 featureControlProfile LYNC_FCP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-LYNC2013 state enabled mode inService
commit
#SBC Configuration for Fax Trunk
#Packet Service Profile
set profiles media packetServiceProfile TELUS_FAX_PSP codec codecEntry1 G711U-20ms-2833-T38 codecEntry2 G711A-20ms-2833-T38 codecEntry3 G729A-20ms-2833-T38
set profiles media packetServiceProfile TELUS_FAX_PSP packetToPacketControl codecsAllowedForTranscoding thisLeg g711a g711u g729 t38 otherLeg g711a g711u g729 t38
set profiles media packetServiceProfile TELUS_FAX_PSP packetToPacketControl transcode only
set profiles media packetServiceProfile TELUS_FAX_PSP rtcpOptions rtcp enable
commit
#IP signaling profile
set profiles signaling ipSignalingProfile FAX_IPSP ipProtocolType sipOnly
set profiles signaling ipSignalingProfile FAX_IPSP commonIpAttributes flags disableMediaLockDown enable
set profiles signaling ipSignalingProfile FAX_IPSP commonIpAttributes flags minimizeRelayingOfMediaChangesFromOtherCallLegAll enable 
set profiles signaling ipSignalingProfile FAX_IPSP commonIpAttributes flags sendRtcpPortInSdp enable storePChargingVector enable suppressReplaceTag enable
set profiles signaling ipSignalingProfile FAX_IPSP egressIpAttributes useLowerCaseDomainNames enable useSipDomainNameInFromField enable useSipDomainNameInRequestUri enable
set profiles signaling ipSignalingProfile FAX_IPSP egressIpAttributes flags disable2806Compliance enable
set profiles signaling ipSignalingProfile FAX_IPSP egressIpAttributes privacy flags includePrivacy enable privacyRequiredByProxy disable msLyncPrivacySupport enable
set profiles signaling ipSignalingProfile FAX_IPSP egressIpAttributes privacy transparency disable privacyInformation pAssertedId
commit
#IP peer
set addressContext default zone TRUSTED ipPeer FAX policy sip fqdnPort 0
set addressContext default zone TRUSTED ipPeer FAX ipAddress 10.35.137.43 ipPort 5084 defaultForIp false
set addressContext default zone TRUSTED ipPeer FAX policy description LYNC2013 packetServiceProfile TELUS_FAX_PSP ipSignalingProfile FAX_IPSP
set addressContext default zone TRUSTED ipPeer FAX authentication incInternalCredentials enabled
set addressContext default zone TRUSTED ipPeer FAX authentication intChallengeResponse enabled
set addressContext default zone TRUSTED ipPeer FAX surrogateRegistration userPart p5872330304 authUserName p5872330304 regAuthPassword pana12345 state enabled sendCredentials challengeForAnyMessageAndInDialogRequests hostPart ipinet3.com
commit
#SIP trunk group
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-FAX mediaIpInterfaceGroupName TRUSTED sourceAddressFiltering enabled
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-FAX signaling rel100Support enabled
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-FAX ingressIpPrefix 10.35.137.43 32
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-FAX policy callRouting elementRoutingPriority TELUS
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-FAX policy digitParameterHandling numberingPlan GENERIC_NUM_PLAN
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-FAX policy media packetServiceProfile TELUS_FAX_PSP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-FAX policy services classOfService DEFAULT_IP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-FAX policy signaling ipSignalingProfile TELUS_IPSP signalingProfile DEFAULT_IP_PROFILE
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-FAX state enabled mode inService
commit
#External Side SBC Configuration
#IP Interface Group
set addressContext default ipInterfaceGroup UNTRUSTED_RTP ipInterface pkt3 ceName little portName pkt3 ipAddress 216.110.2.229 prefix 28 mode outOfService state disabled
commit
set addressContext default ipInterfaceGroup UNTRUSTED_RTP ipInterface pkt3 mode inService state enabled
set addressContext default ipInterfaceGroup UNTRUSTED_RTP ipsec disabled
commit
#IP static route
set addressContext default staticRoute 0.0.0.0 0 216.110.2.225 UNTRUSTED_RTP pkt3 preference 100
commit
#SBC Configuration for TELUS SIP Trunk
#Packet Service Profile
set profiles media packetServiceProfile TELUS_PSP codec codecEntry1 TELUS_G711U_SS_2833_T38 codecEntry2 TELUS_G711A_SS_2833_T38 codecEntry3 TELUS-G729A-2833-T38
set profiles media packetServiceProfile TELUS_PSP packetToPacketControl codecsAllowedForTranscoding thisLeg g711a g711u g729 t38 otherLeg g711a g711u g729 t38
set profiles media packetServiceProfile TELUS_PSP packetToPacketControl conditionsInAdditionToNoCommonCodec differentDtmfRelay enable differentPacketSize enable differentSilenceSuppression enable honorOfferPreference enable honorAnswerPreference enable
set profiles media packetServiceProfile TELUS_PSP packetToPacketControl transcode conditional
commit
#IP signaling profile
set profiles signaling ipSignalingProfile TELUS_IPSP ipProtocolType sipOnly
set profiles signaling ipSignalingProfile TELUS_IPSP commonIpAttributes flags disableMediaLockDown enable includeReasonHeader enable
set profiles signaling ipSignalingProfile TELUS_IPSP commonIpAttributes flags minimizeRelayingOfMediaChangesFromOtherCallLegAll enable sendPtimeInSdp enable sendRtcpPortInSdp enable storePChargingVector enable
set profiles signaling ipSignalingProfile TELUS_IPSP egressIpAttributes flags disable2806Compliance enable disableOptionalRegisterParameters enable
set profiles signaling ipSignalingProfile TELUS_IPSP egressIpAttributes privacy flags includePrivacy enable
set profiles signaling ipSignalingProfile TELUS_IPSP egressIpAttributes privacy transparency disable privacyInformation pAssertedId
commit
#Zone
set addressContext default zone UNTRUSTED-PUBLIC id 4
commit
#SIP signaling port
set addressContext default zone UNTRUSTED-PUBLIC sipSigPort 229 ipInterfaceGroupName UNTRUSTED_RTP ipAddressV4 216.110.2.229 portNumber 5060 mode outOfService state transportProtocolsAllowed sip-udp
set addressContext default zone UNTRUSTED-PUBLIC sipSigPort 229 mode inService state enabled
commit
#IP peer
set addressContext default zone UNTRUSTED-PUBLIC ipPeer TELUS-PUBLIC policy sip fqdnPort 0
set addressContext default zone UNTRUSTED-PUBLIC ipPeer TELUS-PUBLIC ipAddress 209.115.158.100 ipPort 5060 defaultForIp false
set addressContext default zone UNTRUSTED-PUBLIC ipPeer TELUS-PUBLIC policy packetServiceProfile TELUS_PSP ipSignalingProfile TELUS_IPSP
commit
#SIP trunk group
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB media mediaIpInterfaceGroupName UNTRUSTED_RTP sourceAddressFiltering enabled
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB signaling messageManipulation inputAdapterProfile TELUS_INBOUND_SMM outputAdapterProfile DiversionToPAID
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB signaling rel100Support enabled
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB ingressIpPrefix 209.115.158.100 32
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB policy callRouting elementRoutingPriority TELUS
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB policy digitParameterHandling numberingPlan NANP_ACCESS
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB policy media packetServiceProfile TELUS_PSP
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB policy services classOfService DEFAULT_IP
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB policy signaling ipSignalingProfile TELUS_IPSP
set addressContext default zone UNTRUSTED-PUBLIC sipTrunkGroup TWO-WAY-SIP-TELUS-PUB state enabled mode inService
commit
#Global Call Routing Configuration
#Element Routing Priority
set profiles callRouting elementRoutingPriority TELUS entry nationalType 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry nationalType 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry _private 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry _private 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry nationalOperator 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry nationalOperator 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry transit 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry transit 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry carrierCutThrough 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry carrierCutThrough 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry localOperator 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry localOperator 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry userName 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry userName 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry internationalOperator 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry internationalOperator 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry longDistanceOperator 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry longDistanceOperator 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry otherCarrierChosen 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry otherCarrierChosen 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry internationalType 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry internationalType 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry mobile 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry mobile 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority TELUS entry test 2 entityType none
set profiles callRouting elementRoutingPriority TELUS entry test 1 entityType trunkGroup
commit
#Global Configuration
set global sipDomain fe.lync2013.sonusnet.com
commit
#Lync 2013 Routing
set global callRouting routingLabel TO_TWO_WAY_LYNC2013 routingLabelRoute 0 trunkGroup TWO-WAY-SIP-LYNC2013 ipPeer LYNC2013-FQDN proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_TWO_WAY_LYNC2013 overflowNOA none overflowNPI none routePrioritizationType sequence action routes numRoutesPerCall 10
commit
set global callRouting route trunkGroup TWO-WAY-SIP-TELUS-PUB LITTLECE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_LYNC2013
commit
set global callRouting route none Sonus_NULL Sonus_NULL username Sonus_NULL Sonus_NULL all all ALL none FE.LYNC2013.SONUSNET.COM routingLabel TO_TWO_WAY_LYNC2013
set global callRouting route none Sonus_NULL Sonus_NULL standard Sonus_NULL Sonus_NULL all all ALL none FE.LYNC2013.SONUSNET.COM routingLabel TO_TWO_WAY_LYNC2013
commit
#Telus routing
set global callRouting routingLabel TO_TWO_WAY_TELUS_PUB routingLabelRoute 0 trunkGroup TWO-WAY-SIP-TELUS-PUB ipPeer TELUS-PUBLIC proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_TWO_WAY_TELUS_PUB overflowNOA none overflowNPI none routePrioritizationType sequence action routes numRoutesPerCall 10
commit
set global callRouting route trunkGroup TWO-WAY-SIP-LYNC2013 LITTLECE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_TELUS_PUB
set global callRouting route trunkGroup TWO-WAY-SIP-LYNC2013 LITTLECE username P5872330304 Sonus_NULL all all ALL none FE.LYNC2013.SONUSNET.COM routingLabel TO_TWO_WAY_TELUS_PUB
commit

     

     

    Noprint

    Back to Top

    Anchor
    Test Results
    Test Results
    Test Results


     

    Caption
    0Table
    1Test Results
    3Test Results
    S.NoProcedureObservationResultComment
    Basic originated and terminated calls

     

    		   
    TELUS_TC1Call to following number from PBX:
    647-837-0597 Toronto Local
    403-532-8075 Calgary Local
    1-877-353-9586 Toll Free North America
    When hearing the prompt, press 1234# to interrupt the prompt. Should hear "invalid access code" prompt to confirm the DTMF tone detection.
    Note that you may need to dial 1 as it could be a LD call.    		 Pass 
    TELUS_TC2

    Call to the following test line - 9056352304.
    After the call is answered, you will hear a "confirmation tone" and you could disconnect the call.
    Note that you may need to dial 1 as it could be a LD call.

    		 Pass 
    Test with PSTN line    
    Basic inbound/outbound call     
    TELUS_TC3

    Call from PSTN phone to IP PBX phone
    1. Confirm 2-way voice
    2. Confirm the proper calling number is shown
    3. Confirm the proper call display name is shown

    		 Pass 
    TELUS_TC4

    Call from IP PBX phone to PSTN phone
    1. Confirm 2-way voice
    2. Confirm the proper calling number is shown
    3. Confirm the proper call display name is shown

    		 Pass 
    Basic inbound/outbound call with privacy     
    TELUS_TC5

    Call from PSTN phone to IP PBX phone, prefix the IP PBX phone number with *63
    1. Confirm 2-way voice
    2. Confirm the proper calling number is not shown
    3. Confirm the proper call display name is not shown

    		 Pass 
    TELUS_TC6

    Call from IP PBX phone to PSTN phone, when dialling from the IP PBX phone, use the prefix if applicable to temporary suppress the call display
    1. Confirm 2-way voice
    2. Confirm the proper calling number is not shown
    3. Confirm the proper call display name is not shown

    		 Pass 
    Hold and resume     
    TELUS_TC7

    Call from PSTN to IP PBX - after the call setup the PBX phone puts the call on-hold or (MOH), waits 30 seconds, resumes.
    Confirm audio both way after resume.

    		 Pass 
    TELUS_TC8

    Call from IP PBX to PSTN - after the call setup, use PSTN phone to put the call on-hold, wait 30 seconds, resume.
    Confirm audio both way after resume.

    		 Pass 
    Call Transfer (Blind transfer)    
    TELUS_TC9

    IP PBX phone 1 calls IP PBX phone 2
    IP PBX phone 2 performs a blind transfer to PSTN phone
    Confirm audio both way after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC10

    PSTN phone calls IP PBX phone 1
    IP PBX phone 1 performs a blind transfer to IP PBX phone 2
    Confirm audio both way after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC11

    PSTN phone calls IP PBX phone 1
    IP PBX phone 1 performs a blind transfer to another PSTN
    Confirm both way audio. Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC12

    PSTN phone calls IP PBX phone 1
    IP PBX phone 1 performs a blind transfer to Telus mobile client
    Confirm both way audios
    Repeat the same test using SIP REFER

    		 Pass 
    Call Transfer (Consult transfer)    
    TELUS_TC13

    IP PBX phone 1 calls IP PBX phone 2
    IP PBX phone 2 performs a consult transfer to PSTN phone
    Confirm audio both way after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC14

    PSTN phone calls IP PBX phone 1
    IP PBX phone 1 performs a consult transfer to IP PBX phone 2
    Confirm audio both way after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC15

    PSTN phone calls IP PBX phone 1
    IP PBX phone 1 performs a consult transfer to another PSTN
    Confirm both way audio. Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC16

    PSTN phone calls IP PBX phone 1
    IP PBX phone 1 performs a consult transfer to Telus mobile client
    Confirm both way audios
    Repeat the same test using SIP REFER

    		 Pass 
    Call Forwarding Unconditional     
    TELUS_TC17

    Configure IP PBX phone 1 to CFU to PSTN phone
    IP PBX phone 2 calls phone 1 and should CFU to PSTN phone
    1. Confirm 2-way voice
    2. Confirm phone 1 number and display at PSTN phone

    		   
    TELUS_TC18

    Configure IP PBX phone 1 to CFU to PSTN phone
    IP PBX phone 2 calls phone 1 and should CFU to PSTN phone
    1. Confirm 2-way voice
    2. Confirm phone 1 number and display at PSTN phone

    		   
    TELUS_TC19

    Configure IP PBX phone 1 to CFU to telus mobile client
    PSTN phone calls phone 1 to trigger the call forwarding
    1. Confirm audio prompt
    2, confirm the phone 1 number and display Mobile client

    		   
    Call Forwarding Busy    
    TELUS_TC20

    Configure IP PBX phone 1 to CFB to PSTN phone
    IP PBX phone 2 calls phone 1 and should CFB toPSTN phone
    1. Confirm 2-way voice
    2. Confirm phone 1 number and display at PSTN phone

    		 Pass 
    TELUS_TC21

    Configure IP PBX phone 1 to CFB to PSTN phone
    from PSTN calls phone 1 and should CFB to PSTN phone
    1. Confirm 2-way voice
    2. Confirm phone 1 number and display at PSTN phone

    		 Pass 
    TELUS_TC22

    Configure IP PBX phone 1 to CFU to Telus Mobile client
    PSTN phone calls phone 1 to trigger the call forwarding
    1. Confirm audio prompt
    2. Press 1234# to interrupt the prompt

    		 Pass 
    Call Forwarding Don’t Answer    
    TELUS_TC23

    Configure IP PBX phone 1 to CFDA to PSTN phone
    IP PBX phone 2 calls phone 1 and should CFDA toPSTN phone
    1. Confirm 2-way voice
    2. Confirm phone 1 number and display at PSTN phone

    		 Pass 
    TELUS_TC24

    Configure IP PBX phone 1 to CFDA to PSTN phone
    from PSTN calls phone 1 and should CFDA to PSTN phone
    1. Confirm 2-way voice
    2. Confirm phone 1 number and display at PSTN phone

    		 Pass 
    TELUS_TC25

    Configure IP PBX phone 1 to CFU to Telus Mobile client
    PSTN phone calls phone 1 to trigger the call forwarding
    1. Confirm audio prompt
    2. confirm phone 1 number and display on mobile client

    		 Pass 
    Voicemail     
    TELUS_TC26

    IP PBX phone 1 calls PSTN phone,
    Don't answer the call in the PSTN phone; after 4 ring, voicemail kick in
    Record a message
    Follow the prompt to play back the message
    Follow the prompt to cancel the recording then hang up.

    		 Pass 
    Conference call     
    TELUS_TC27

    PSTN phone calls IP PBX phone 1
    IP PBX phone 1 performs a conference call with IP PBX phone 2
    Confirm audio among the parties

    		 Pass 
    TELUS_TC28

    PSTN phone calls IP PBX phone 1
    IP PBX phone 1 performs a conference call with PSTN
    Confirm audio with PSTN phone and IP PBX phone

    		 Pass 
    Long calls - minimum recommendation    
    TELUS_TC29long duration call:  2 hours - to PSTN phone Pass 
    TELUS_TC30long duration call on hold: Call to PSTN, PBX places call on hold for 20 min, resume call, verify 2 way audio Pass 
    TELUS_TC31

    IP PBX phone 1 calls PSTN phone
    IP PBX phone 1 performs a conference call to Telus Mobile client
    Confirm audio with PSTN phone and IP PBX phone

    		 Pass 
    FAX     
    TELUS_TC32Repeat the test by setup the call with both G.711 and G.729. Outbound (from IP PBX to PSTN) T.38 testing , set up the call with G711, PBX re-invite with T38. verified the fax passed with T.38. Pass 
    TELUS_TC33Setup the call with  G.711 as preferred codec . Outbound (from IP PBX to PSTN) FAX G.711 pass-through testing,test G711 fax pass through. Pass 
    TELUS_TC34Inbound (from PSTN to IP PBX) T.38 testing Pass 
    TELUS_TC35Inbound (from PSTN to IP PBX) FAX G.711 pass-through  testing Pass 
    Test with TELUS VoIP Account    
    Basic inbound/outbound call     
    TELUS_TC36

    Repeat the test by both G.711 and G.729. Call from TELUS VoIP client to IP PBX phone,
    1. Confirm 2-way voice
    2. Confirm the proper calling number is shown
    3. Confirm the proper call display name is shown

    		 Pass 
    TELUS_TC37

    Repeat the test by setup the call with both G.711 and G.729. Call from IP PBX phone to TELUS VoIP client,
    1. Confirm 2-way voice
    2. Confirm the proper calling number is shown
    3. Confirm the proper call display name is shown

    		 Pass 
    Basic inbound/outbound call with privacy     
    TELUS_TC38

    Call from TELUS VoIP client to IP PBX phone with privacy
    1. CConfirm 2-way voice
    2. Confirm the proper calling number is not shown
    3. Confirm the proper call display name is not shown

    		 Pass 
    TELUS_TC39

    Call from IP PBX phone to TELUS VoIP client, when dialling from the IP PBX phone, use the prefix if applicable to temporary suppress the call display
    1. Confirm 2-way voice
    2. Confirm the proper calling number is not shown
    3. Confirm the proper call display name is not shown

    		 Pass 
    Hold and resume     
    TELUS_TC40

    Call from TELUS VoIP to IP PBX - after the call setup the PBX phone puts the call on-hold or (MOH), waits 30 seconds, resumes.
    Confirm audio both way after resume.

    		 Pass 
    TELUS_TC41

    Call from IP PBX to TELUS VoIP - after the call setup, use TELUS VoIP to put the call on-hold or (MOH), waits 30 seconds, resumes.
    Confirm 2-way voice after resume.

    		 Pass 
    Call Transfer (Blind transfer)    
    TELUS_TC42

    IP PBX phone 1 calls IP PBX phone 2
    IP PBX phone 2 performs a blind transfer to TELUS VoIP client
    Confirm 2-way voice after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC43

    TELUS VoIP client calls IP PBX phone 1
    IP PBX phone 1 performs a blind transfer to PSTN
    Confirm 2-way voice after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC44

    TELUS VoIP client calls IP PBX phone 1
    IP PBX phone 1 performs a blind transfer to Telus mobile client

    Repeat the same test using SIP REFER

    		 Pass 
    Call Transfer (Consult transfer)    
    TELUS_TC45

    IP PBX phone 1 calls IP PBX phone 2
    IP PBX phone 2 performs a consult transfer to TELUS VoIP client
    Confirm 2-way voice after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC46

    TELUS VoIP client calls IP PBX phone 1
    IP PBX phone 1 performs a consult transfer to PSTN
    Confirm 2-way voice after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC47

    TELUS VoIP client calls IP PBX phone 1
    IP PBX phone 1 performs a consult transfer to Telus mobile client
    Repeat the same test using SIP REFER

    		 Pass 
    Call Forwarding Unconditional     
    TELUS_TC48

    Configure IP PBX phone 1 to CFU to TELUS VoIP client
    IP PBX phone 2 calls phone 1 and should CFU toTELUS VoIP client
    1. Confirm 2-way voice
    2. Confirm phone 1 number and display at TELUS VoIP client

    		 Pass 
    TELUS_TC49

    Configure IP PBX phone 1 to CFU to 1-877-353-9586
    TELUS VoIP client calls phone 1 to trigger the call forwarding
    1. Confirm 2-way voice
    2. Press 1234# to interrupt the prompt

    		 Pass 
    TELUS_TC50

    TELUS VoIP client calls IP PBX phone 1
    IP PBX phone 1 performs a CFU to Telus mobile client
    Repeat the same test using SIP REFER

    		 Pass 
    Voicemail     
    TELUS_TC51

    Repeat for both G.711 and G.729. IP PBX phone 1 calls TELUS VoIP client,
    Don't answer the call in the TELUS VoIP client; after 4 ring, voicemail kick in
    Record a message
    Follow the prompt to play back the message
    Follow the prompt to cancel the recording then hang up

    		 Pass 
    Conference call     
    TELUS_TC52

    TELUS VoIP client calls IP PBX phone 1
    IP PBX phone 1 performs a conference call with IP PBX phone 2
    Confirm audio among the parties

    		 Pass 
    TELUS_TC53

    IP PBX phone 1 calls TELUS VoIP client
    BVOIP performs a conference call to Telus mobile Client
    Confirm audio with VoIP client and IP PBX phone

    		 Pass 
    Test with TELUS mobile     
    Basic inbound/outbound call     
    TELUS_TC54

    Call from TELUS mobile client to IP PBX phone
    1. Confirm 2-way voice
    2. Confirm the proper calling number is shown
    3. Confirm the proper call display name is shown

    		 Pass 
    TELUS_TC55

    Repeat the test by setup the call with both G.711 and G.729. Call from IP PBX phone to TELUS mobile client
    1. Confirm 2-way voice
    2. Confirm the proper calling number is shown
    3. Confirm the proper call display name is shown

    		 Pass 
    Basic inbound/outbound call with privacy     
    TELUS_TC56

    Call from TELUS mobile client to IP PBX phone with privacy enabled.
    1. Confirm 2-way voice
    2. Confirm the proper calling number is not shown
    3. Confirm the proper call display name is not shown

    		 Pass 
    TELUS_TC57

    Call from IP PBX phone to TELUS mobile client, when dialling from the IP PBX phone, use the prefix if applicable to temporary suppress the call display
    1. Confirm 2-way voice
    2. Confirm the proper calling number is not shown
    3. Confirm the proper call display name is not shown

    		 Pass 
    Hold and resume     
    TELUS_TC58

    Call from TELUS mobile to IP PBX - after the call setup the PBX phone puts the call on-hold or (MOH), waits 30 seconds, resumes.
    Confirm audio both way after resume.

    		 Pass 
    TELUS_TC59

    Call from IP PBX to TELUS mobile - after the call setup, use TELUS mobile to put the call on-hold or (MOH), waits 30 seconds, resumes.
    Confirm 2-way voice after resume.

    		 Pass 
    Call Transfer (Blind transfer)    
    TELUS_TC60

    IP PBX phone 1 calls IP PBX phone 2
    IP PBX phone 2 performs a blind transfer to telus mobile client
    Confirm 2-way voice after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC61

    TELUS mobile client calls IP PBX phone 1
    IP PBX phone 1 performs a blind transfer to IP PBX phone 2
    Confirm 2-way voice after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC62

    TELUS mobile client calls IP PBX phone 1
    IP PBX phone 1 performs a blind transfer to 1-877-353-9586
    Confirm the prompt and interrupt the prompt with 1234#
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC63

    TELUS mobile client calls IP PBX phone 1
    IP PBX phone 1 performs a blind transfer to 1-877-353-9586
    Confirm the prompt and interrupt the prompt with 1234#
    Repeat the same test using SIP REFER

    		 Pass 
    Call Transfer (Consult transfer)    
    TELUS_TC64

    IP PBX phone 1 calls IP PBX phone 2
    IP PBX phone 2 performs a consult transfer to Telus mobile client
    Confirm 2-way voice after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC65

    TELUS mobile client calls IP PBX phone 1
    IP PBX phone 1 performs a consult transfer to IP PBX phone 2
    Confirm 2-way voice after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC66

    TELUS mobile client calls IP PBX phone 1
    IP PBX phone 1 performs a consult transfer to 1-877-353-9586
    Confirm the prompt and interrupt the prompt with 1234#
    Repeat the same test using SIP REFER

    		 Pass 
    TELUS_TC67

    TELUS mobile client calls IP PBX phone 1
    IP PBX phone 1 performs a blind transfer to another Telus Mobile client
    Confirm 2-way voice after the transfer
    Repeat the same test using SIP REFER

    		 Pass 
    Call Forwarding Don’t Answer    
    TELUS_TC68

    Configure a Mobile Phone to Forward calls to a PSTN when Dont Answer. Test both G711 and G729
    Mobile Phone to CFNA to TELUS PSTN Number
    IP PBX phone 1 calls Mobile Phone and should CFNA toTELUS PSTN Number
    1. Confirm 2-way voice
    2. Confirm phone 1 number and display at PSTN number

    		 Pass 
    Call Forwarding Unconditional    
    TELUS_TC69

    Configure IP PBX phone 1 to CFU to TELUS mobile client
    IP PBX phone 2 calls phone 1 and should CFU toTELUS mobile client
    1. Confirm 2-way voice
    2. Confirm phone 1 number and display at TELUS mobile client

    		 Pass 
    TELUS_TC70

    Configure IP PBX phone 1 to CFU to 1-877-353-9586
    TELUS mobile client calls phone 1 to trigger the call forwarding
    1. Confirm audio prompt
    2. Press 1234# to interrupt the prompt

    		 Pass 
    Voicemail     
    TELUS_TC71-1

    Repeat the test by setup the call with G.711 and G.729.Test with both Mpathix and Movius VM platforms. IP PBX phone 1 calls TELUS mobile client
    Don't answer the call in the TELUS mobile client; after 4 ring, voicemail kick in
    Record a message
    Follow the prompt to play back the message
    Follow the prompt to cancel the recording then hang up

    		 Pass 
    TELUS_TC71-2

    From UMTS call PBX phone, CFB to VM or CFDA to PBX VM
    Record a message
    Follow the prompt to play back the message
    Follow the prompt to cancel the recording then hang up

    		 Pass 
    Conference call     
    TELUS_TC72

    TELUS mobile client calls IP PBX phone 1
    IP PBX phone 1 performs a conference call with IP PBX phone 2
    Confirm audio among the parties

    		 Pass 
    TELUS_TC73

    TELUS mobile client calls IP PBX phone 1
    IP PBX phone 1 performs a conference call with Telus VOIP
    Confirm audio with mobile client and IP PBX phone

    		 Pass 
    TELUS_TC74

    IP PBX phone 1 calls TELUS mobile client
    client a conference call to Telus VOIP
    Confirm audio with mobile client and IP PBX phone

    		 Pass 
    DTMF    
    TELUS_TC75

    From PBX dial 4036929600 ( conference bridge)
    When hearing the prompt, enter valid Telus conference code. Follow prompts and verify connected to conference bridge.
    Verify that pressed keys are recognized and successfully accessed conference bridge.
    Verify by calling to conference bridge from PSTN. Test Inband DTMF by programming PBX end point

    		 Pass 
    TELUS_TC76

    From PBX dial 1-877-353-9586
    When hearing the prompt, enter valid Telus conference code. Follow prompts and verify connected to conference bridge.
    Verify that pressed keys are recognized and successfully accessed conference bridge.
    Verify by calling to conference bridge from PSTN. Test RFC2833 by programming PBX endpoint

    		 Pass 
    Automatic CLID Blocking    
    TELUS_TC77

    Automatic Blocking Feature to be setup for the SIP PBX in the switch.
    Call from SIP PBX to a Bell Land Line Number.
    1. Confirm 2-way voice
    2. Confirm the proper calling number (IPTR2 DID or Alternate Number from SIP PBX) is not shown
    3. Confirm that SIP PBX is not sending out Name in the call.

    		 Not Applicable 

    Conclusion

    This Application Notes document describes the configuration steps required for Sonus SBC 5xx0 to successfully interoperate with Lync 2013. All feature and serviceability test cases were completed and passed with the exceptions/observations noted in Test Results.

     

    Noprint

    Back to Top

     

     

     

     

    This configuration guide supports features