Page History

Overview

You can configure the

to use a Primary DNS Server, a Secondary DNS Server, and a Domain Specific DNS Server (Split-DNS) to resolve FQDNs.

The Primary and Secondary DNS servers are configured in the Node Level Settings. For more information,

refer to Configuring Host Information and DNS.

A Domain Specific DNS Server is configured through the Split-DNS settings. The following section describes how to configure the Split-DNS.

Configuring Split-DNS 

To create a Split-DNS entry:

1. In the WebUI, click the Settings tab.

2. In the left navigation page, go to Protocols > DNS > Split-DNS. An IPv4 example is shown below; you can configure the DNS Server IP

1. using IPv4 or IPv6 format.

   Image Modified
   
   

2. Click the Create Split DNS List Entry (Image Modified) icon at the top of the Split DNS page.

   Image Modified
   
   

3. Enter the following information.
   
   1. In DNS Server IP, enter the IP address for the specific domain (IPv4 or IPv6).

   2. In Domain Name, enter the domain name for the specific domain.

4. Click OK.
         
   The entry now appears in the Split DNS table. 

Create Split-DNS Entry - Field Definitions

DNS Server IP

The DNS Server IP is the IP address that can resolve names configured to the specified Domain Name attribute. Valid entry: IP address (IPv4 or IPv6).

Domain Name

Name of the specified domain to

use for Split DNS. Valid entry: maximum of 255 characters.