...
...
In this section:
...
Use this screen to configure the Subscribe policer. To View and Edit SubscribeOn the SBC main screen, go to Configuration |
...
...
> Security Configuration > SIP CAC Profile > Subscribe. Select the desired |
...
SIP CAC Profile from the drop-down list to view its respective Subscribe parameters. The Subscribe window is displayed. |
Figure 1: Security Configuration - Sip Cac Profile - Subscribe
Image Modified |
The following fields are displayed:
...
Subscribe Parameters: Parameter | Length/Range | Description |
---|
Ingress Aggregate Preference |
|
...
1-10 | The preference for SUBSCRIBE within the ingress aggregate policer. |
|
...
The default value is 1. | Ingress Burst |
|
...
...
| 1-10000 | The maximum burst size for ingress SUBSCRIBE. |
|
...
The default value is 1. | Ingress Rate |
|
...
| 1-1000, or unlimited | The maximum ingress |
|
...
SUBSCRIBE rate in SUBSCRIBE per period. |
|
...
The default is unlimited. | Ingress Rate |
|
...
...
1-10 | The time period (in seconds) over which ingress SUBSCRIBE rate applies. |
|
...
The default value is 1 second. | Egress Aggregate Preference |
|
...
...
preference for SUBSCRIBE within the egress aggregate policer. |
|
...
The default value is 1. | Egress Burst |
|
...
...
1-1000 | The maximum burst size for egress SUBSCRIBE. |
|
...
The default value is 1. | Egress Rate |
|
...
1-1000, or unlimited | The maximum egress SUBSCRIBE rate in aggregate messages per period. |
|
...
The default is unlimited. | Egress Rate |
|
...
...
...
time period (in seconds) over which egress SUBSCRIBE rate applies. |
|
...
The default value is 1 second. |
Make the required changes and |
...