Page History

Panel
In this section: Table of Contents maxLevel 3

SecureLink (also known as SecureLink Gatekeeper) is a third party remote management tool used extensively by the

Spacevars
0 company

 Support team. SecureLink allows

Spacevars
0 company

 dedicated remote connectivity into your devices while providing you with the latest in security and audit ability. This object provides the ability to view the DNS IP address, SecureLink Gatekeeper version, edit registration code and also the status and results of the host name lookup test and direct connectivity test of the SecureLink access test.

From the

Spacevars
0 product

 main screen, navigate to Administration > System Administration > SecureLink. The SecureLink window is displayed.

Figure 1: Secure Link

Info
title Note
The security of the Spacevars 0 product is enhanced to restrict the port 4680 to "localhost". With this enhancement, you cannot access the Gatekeeper (web-based SecureLink GUI, served from the port 4680) remotely using the management port of the Spacevars 0 product . Access to the Gatekeeper tool through your browser is not required to configure SecureLink.

Info
title Note
The SecureLink access is available only for hardware-based Spacevars 0 product s.   The Open Gatekeeper button is deprecated.

To Install/Uninstall SecureLink

To install and/or uninstall SecureLink, click Install SecureLink and Uninstall SecureLink  respectively. By default, SecureLink is bundled with the

Spacevars
0 product

 application package. When you install the

Spacevars
0 product

 application, SecureLink is automatically installed as part of the application installation.

Info
title Note
To uninstall SecureLink: Disable access to Gatekeeper (if it is in enabled state) - click Disable Gatekeeper Access. Click Uninstall SecureLink.

To Setup the SecureLink Access

To setup SecureLink, perform the following:

1. Enter the IP address of the DNS server in the DNS IP address field.
2. Enter the registration code in the Registration code field (The registration code can be obtained from

   Spacevars
   0 company

   ).

3. Click Enable Gatekeeper Access. The Gatekeeper access status is displayed as enabled in the screen.

   Info
   title Note
   Do not enter the same registration code on both the Spacevars 0 product s in an HA pair. If you do, only one Spacevars 0 product is enabled at a time.

   
   

4. Click Test SecureLink Access to perform the Host name lookup test and Direct connectivity test.

   Info
   title Note
   The Host name lookup test and Direct connectivity test field status change to In Progress.

   
   Once the host name lookup and direct connectivity test is successful, you can access the SecureLink application.

To Disable Gatekeeper Access

To disable Gatekeeper Access, perform the following:

1. On the main screen, go to Administration > System Administration > SecureLink.

2. Click Disable Gatekeeper Access.
   It may take a while to disable Gatekeeper Access.

To Collect the SecureLink Gatekeeper Logs

To collect the logs for troubleshooting SecureLink issues:

1. Ensure that access to the Gatekeeper is enabled.

2. Click Gatekeeper Logs.

   Info
   title Note
   Gatekeeper logs are available in the /var/log/sonus/securelink directory of the Spacevars 0 product . To access the logs, root level privileges are required.