The Revert Software Version window provides the option to revert from the current
software version to the previous version.
On the
main screen, go to
Administration >
System Administration >
Revert Software Version. The
Revert Software Version window is displayed.
Figure 1: Initial Revert Software Version Screen
This window is divided into two panes :
| Anchor |
|---|
| installedsoftwareversion |
|---|
| installedsoftwareversion |
|---|
|
Installed Software Versions
This pane lists the software versions installed on each partition of the
. This information displayed in this pane is based on whether the
is standalone or part of an HA pair.
The following parameters are displayed:
Table 1: Installed Software Versions Parameters
| Parameter Name | Description |
|---|
| System/Partition | Each server name is listed twice in this column accompanied by a version label, Version 1 and Version 2. Version 1 - This signifies the previous software version to revert to.Version 2 - This signifies the latest software version.
|
| Installed Software Version | The installed software version of each system/partiion displays in this field. |
| Current Boot Version | A check mark ( ) in this field indicates the partition is the current boot version.
|
In the following example, the
is standalone and
Version 2 is the current boot version.
Figure 2: Installed Software Versions Screen
| Anchor |
|---|
| revertsoftware |
|---|
| revertsoftware |
|---|
|
Revert Software
This pane provides the details on reverting the
software. If the software version for the
is supported for reverting, then a list of
the specific server name(s) is displayed in the
Revert Software pane.
The following parameters are displayed:
Table 2: Revert Software Parameter Information
| Parameter Name | Description |
|---|
| Revert the software boot version | This specifies the name of the servers used for reverting. |
| Version | This specifies the revert version of the application. |
| Last used | This specifies when the software was last used. |
To Revert Software
Click 
to start the revert process.
The Change Boot Version confirmation dialog displays.
Click Ok to continue. The revert operation takes around 15 to 20 minutes to complete.
| Note |
|---|
|
At this point the reboots and the EMA Platform Mode login screen displays. |
Re-login to the
in the Platform mode.Navigate to Administration > System Administration > Revert Software Version. The Revert Software Version window appears.
Only the reverted software version is displayed. This concludes the Revert Software functionality. For more information on reverting the
application, refer to Reverting SBC Application.| Note |
|---|
|
In the following example, the is part of an HA pair. Perform the Revert Software functionality on the Standby (now Active) SBC too. |