Page History
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Enables and disables the supervision that disconnects a call following silence for the length of time defined in the Silence Based Disconnect Timer field. Silence is detected only on the audio stream coming into the FXO interface side of the call. Silence Based Disconnect |
Silence Level
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
The level below which line noise must remain to qualify for silence. This field is only visible when Silence Based Disconnect supervision is enabled.
Silence-Based Disconnect Timer
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Defines the duration of time, in seconds for silence-based disconnect. This field is only visible when Silence Based Disconnect supervision is enabled.
Tone Based Disconnect
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Enables and disables tone-based disconnect supervision of the CAS line. This field is only visible when Loop Start Type is set to Basic.
Disconnect Tone Cadences Per Cycle
...
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Defines the desired on/off cadence time in one cycle for disconnect tone detection. This field is only visible when Tone Based Disconnect is enabled.
Dial Delay (When Dial Tone Detection is disabled
...
)
...
Specifies the duration, in milliseconds, of the delay between the off-hook condition and sending digits.
Provide Tone With Answer
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
...
Should an inbound FXO call fail before it connects, the
| Spacevars | ||
|---|---|---|
|
Overview
Content Tools