Page History
...
0 | Figure |
---|---|
1 | Status Panel LEDs |
Panel | ||||||
---|---|---|---|---|---|---|
In this section:
|
Status Panel LEDs
This section describes the Status LEDs located on the front panel of the
Spacevars | ||
---|---|---|
|
...
Anchor | ||||
---|---|---|---|---|
|
1. Power Status LED
This status LED indicates the power conditions of the
Spacevars | ||
---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
Color | Status |
---|---|
Green | System is connected to proper power source. |
Off | System is not connected to power source. |
2. Alarms Status LED
This status LED indicates the alarm state of the
Spacevars | ||
---|---|---|
|
For detailed information about alarm types, see Alarms and Events Reference.
Anchor | ||||
---|---|---|---|---|
|
Color | Status |
---|---|
Green | No alarm. |
Off | Warning (indicates the lowest severity level of an alarm has occurred). |
Amber | Minor alarm. |
Red | Major alarm. |
Red Blinking | Critical alarm. |
3. Peer Node Status LED (Locator LED)
Tip |
---|
The Peer Node Status LED is also recognized as the Locator LED when configuring this option in the WEB GUI. |
This status LED is green when the
Spacevars | ||
---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
Color | Status |
---|---|
Green | System is fully powered up. |
Off | User Enabled option. LED is turned off through the LED Locator configuration option. See Configuring Host Information and DNS. |
Blinking Green | User Enabled option. LED is turned to blinking green through the LED Locator configuration option. Light will blink once per second. See Configuring Host Information and DNS. |
4. Ready Status LED
This status LED indicates if the
Spacevars | ||
---|---|---|
|
Color | Status |
---|---|
Green | System is properly initialized. |
Off | System is not properly initialized. |
...
Ethernet Port Status LEDs
This section describes the Ethernet Port Status LEDs located in the right and left corners of the Ethernet ports. See below for LED ranges.
...
0 | Figure |
---|---|
1 | Ethernet Port Status LEDs |
Anchor | ||||
---|---|---|---|---|
|
1. Ethernet Port Status LED
Tip | ||||||||
---|---|---|---|---|---|---|---|---|
The Ethernet LEDs displayed represent a
|
This Ethernet Port Status LEDs indicate the status conditions of the Ethernet ports on the
Spacevars | ||
---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
Left-Side LED
Color | Status |
---|---|
Amber | Indicates Ethernet port speed at 10/100Mbps. |
Off | Indicates Ethernet port speed at 1000Mbps. |
Right-Side LED
Color | Status |
---|---|
Green | Ethernet link is established. |
Flashing Green | Ethernet link is active. Data is being sent/received. |
Off | Ethernet link is down. |
Right/Left LED Combinations
Left-Side Color | Right-Side Color | Result |
---|---|---|
Amber | Off | Port speed is 10Mbpbs. Ethernet link is down. |
Amber | Green | Port speed is 100Mbps. Ethernet link is established. |
Off | Green | Port speed is 1000Mbps. Ethernet link is established. |
...