| Info |
|---|
|
The Platform Manager is not accessible through the EMA. |
Use this object command to enable DoD mode, and to enable/disable CLI and/or EMA access for temporary troubleshooting and diagnostics.
Command Syntax
| Code Block |
|---|
% set system admin <SYSTEM NAME> dod
cliAccess <disabled | enabled>
mode <disabled | enabled>
pmAccess <disabled | enabled>
|
...
| Warning |
|---|
|
Enabling CLI and/or EMA for DoD mode lowers the security posture of the SBC. Remember to disable CLI and PM access once you complete troubleshooting and/or diagnostics is completed. |
| Caption |
|---|
| 0 | Table |
|---|
| 1 | DOD Parameters |
|---|
| 3 | DOD Parameters |
|---|
|
Parameter | Description |
|---|
cliAccess | Use this flag to temporarily enable CLI for troubleshooting and diagnostic while the SBC is in DoD mode. disabled (default)enabled
| Info |
|---|
When enabled, this control opens up port 22. |
| mode | Use this flag to enable/disable DoD Mode. For more information about port usage, refer to Ribbon Product Interoperability. disabled (default)enabled
| Info |
|---|
When enabled, this control automatically blocks access to ports 22, 2024, 444, and 3091. |
| pmAccess | Use this flag to temporarily enable EMA's Platform Mode for troubleshooting and diagnostic while the SBC is in DoD mode. disabled (default)enabled
|
|
...
| Info |
|---|
When enabled, this control opens up port 444. |
|
|