...
On the SBC main screen, go to Configuration > System Provisioning > Security Configuration > Cert Expiry Check. The Cert Expiry Check window is displayed.
Figure 1: Security Configuration - Cert Expiry Check
The following fields are displayed:
Cert Table 1: Cert Expiry Check Parameters:
Parameter | Length/Range | Description |
---|---|---|
Cert Re Check |
Rate | 8-720 hours, or 'disable' |
Specifies the interval, in hours (in increments of 1 hour), for SBC to re-check certificates. |
Type 'disable' to turn off this feature. The default value is 24. |
disable
8-720 hours, in increments of 1 hour
Expiry Warning Threshold
| ||
Expiry Warning Threshold | 30-90 hours, or 'disable' | Specifies the number of days |
(in increments of 1 day) before a certificate expiration date on which to generate an expiry warning message. |
Type 'disable' to turn off this feature. The default value is 60. |
disable
30-90 hours, in increments of 1 day
Expiration Periodic Warning
Expiration Periodic Warning | 3-14 days, or 'disable' | Specifies the frequency, in days (in increments of 1 day), for sending periodic warning reminders once the Expiry Warning Threshold has been met. |
Type 'disable' to turn off this feature. The default value is 7. |
disable
3-14 days, in increments of 1 day
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.