Page History
Perform the following steps from EMS and SBC to register the SBC with the EMS to facilitate performing Lawful Intercept (LI) CDC and target settings.
- From the EMS, register the SBC node on EMS as user 'admin'.
- From the SBC, configure the 'calea' user on SBC.
From the EMS, use vi (or other text editor) to add the following three lines to /export/home/ems/weblogic/sonusEms/data/sys/SystemConfig.txt file. This enables 'calea' user on EMS.
Code Block language none psxClientVersionFile=/export/home/ems/weblogic/sonusEms/data/sys/PsxClientVersion.txt defaultCaleaUser=true
Restart the EMS by logging in as insight user and entering the commands:
Code Block language none ./sonusEms stop; ./sonusEms start;
Modify the EMS admin user/password used for registration of SBC Node to 'calea' user/password.
Login to EMS as admin user.
Under Network Mgmnt roll-up panel, click Insight Administration.
From the left panel, expand the SBC 5x00 tree and select the SBC node.
Modify the user/password used for registration of SBC Node to 'calea' user/password.
Click Update (do not click Discover)
Login to the EMS as 'calea' user and perform CDC configuration. See
for details.Link_in_new_tab Text CDC Devices Configuration URL https://doc.rbbn.com/display/EMSDOC93/CDC+Devices+Configuration Logout 'calea' user from the EMS.
Login to EMS again using 'admin' user.
Revert SBC's Node Registration user setting back to 'admin' user/password.
Expand the SBC 5x00 tree and select the SBC Node, modify the user/password used for registration of SBC Node to admin user/password
Click Update and then Discover.
Info |
---|
Related articles: |