Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Automatic update to correct links

...

  • Ribbon SBC SWe Core
  • Ribbon SBC SWe Core license
    • A valid license from Ribbon is required to enable functionality on Ribbon SBCs. Each SBC license provides a base set of capabilities to allow enabling and adding of additional features and capacity, as required.
  • TLS certificates for SBC SWe Core
  • Ribbon PSX
  • NICE Engage setup

...

To deploy Ribbon SBC SWe Core StandAlone instance, refer to SBC Core 10.1.x Documentation

Ribbon SBC High Availability

To deploy Ribbon SBC SWe Core in HA mode on different platforms, refer to SBC Core Software Installation and Upgrade Guide

Info

During this interop, SBC SWe Core HA was installed on VMware platform by following the procedure described in Installing SBC Application in High Availability Mode.


Tip
  • After successful installation, ensure the time on both Active and Standby SBCs is in sync.
  • NTP Sync verification:
    • Run the command 'timedatectl' to check if NTP is synchronized.
    • File /etc/ntp.conf should contain the IP of the NTP server that you have configured during installation

...