Page History
...
To automatically upgrade the SBC software:
- In the SBC Edge WebUI, click the Tasks tab.
In the left navigation pane, click System > Firmware Upgrade.
Perform a Backup on the configuration file.
Enter an optional Passphrase (see Using the Custom Passphrase).
Under Select File, click the Browse button and select the SBC firmware file listed in the general SBC Upgrade guide to upload.
Click Upgrade. The following warning popup will be displayed:
Pagebreak
Click OK to upload the new firmware. Do not close or navigate away from the browser window, or you may receive partial results. Throughout the upload process, the web interface displays update messages to indicate the progression of the upgrade, as shown below. (If you navigate to this view from another browser, it will also display the progress.) Once the upgrade is complete, the system automatically reboots.Anchor Software Upload Software Upload
...
Overview
Content Tools