...
The IP addresses configured on the three logical interfaces and the VLAN interfaces are used for transporting all the VOIP media packets (e.g., RTP, SRTP) and all protocol packets (e.g., SIP, RTCP, TLS). DNS servers of the customer's network should map the
system hostname to the configured IP addresses. The hostname or these IP addresses may be used by UC-enabling systems such as SIP-phones, IP-PBX and Microsoft
Lync Skype Servers and for
accessing accessing WebUI.
| Info |
|---|
Typical Skype for Business deployment where all three Ethernet ports are used: - Ethernet Port 1 to LAN
- Ethernet Port 2 to WAN network 1 (primary)
- Ethernet Port 3 to WAN network 2 (backup)
|
...
The
system has one predefined logical interface for each of the four Ethernet ports. In most deployments, one of these logical interfaces (typically
Ethernet 1 IP) and its assigned IP address is used for transporting all the VOIP media packets (e.g., RTP, SRTP) and all protocol packets (e.g., SIP, RTCP, TLS). DNS servers of the customer's network should map the
system hostname to this IP address. The hostname or these IP addresses may be used by UC-enabling systems such as SIP-phones, IP-PBX and Microsoft
Lync Skype Servers and for accessing the
WebUI.
...
The
system has four logical interfaces. In most deployments, one of these logical interfaces (typically
Ethernet 1 IP) is assigned an IP address used for transporting all the VOIP media packets (e.g., RTP, SRTP) and all protocol packets (e.g., SIP, RTCP, TLS). DNS servers of the customer's network should map the
system hostname to this IP address. The hostname or these IP addresses may be used by UC-enabling systems such as SIP-phones, IP-PBX and Microsoft
Lync Skype Servers and for accessing the
WebUI.
...