Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb41059c, userName='null'}
REV5UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cef30cd0, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd700a1f, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ccf70906, userName='null'}

...

titleNote

...

Use this procedure to map the network interfaces in the initial setup on the

Spacevars
0product3
. The Cloud-init function provides an alternative method to running Initial Setup on the
Spacevars
0series3
. For details on using Cloud-init, refer to Using Cloud-init to run the Initial Setup on SBC SWe Edge.

You do not need to perform this procedure if you use the cloud-init function.

...

Info
titleNote

An ESXi VMware console is used as an example for this procedure, other consoles may look slightly different.


Info
titleNote

To assign a virtual NIC to a physical network adaptor, refer to the respective third-party documentation:

...

...


Info
titleNote

Access the console by: 

    • Clicking the Console tab (for KVM Hypervisor/Microsoft Hyper-V/VMware ESXi) or Serial Console tab (for Azure)
      or
    • Clicking

...

    • the Summary tab, and then clicking the Open Console link. (The 
      Spacevars
      0series3
             must be powered on for this to work).


Start

  1. Log in as user netconfig with password as Config!. Change the password when prompted.

    Note
    iconfalse
    titleNote

    Passwords must be at least six characters in length and include uppercase and lowercase characters, and numerals.

...

  1. Modify Password

...

  1. :

...


  1. Image Modified

...



  1. Static or DHCP IP

...

  1. :

    Image Modified


  2. Choose DHCP or enter a static IP address.

    Info

    For 

    Spacevars
    0series3
    deployment in Azure, Microsoft does not recommend assigning static IP address on the
    Spacevars
    0series3
    's Ethernet port; you must configure the
    Spacevars
    0series3
    's ethernet port to use DHCP.


    Code Block
    Would you like to configure a static IP address for Initial Setup on the Admin interface? This is only required if DHCP is unavailable (y/[n]): n

     

    Note
    iconfalse
    titleNote

    Spacevars
    0company
    recommends that you first connect the admin port to a network with DHCP server enabled, otherwise you will need to enter a static IP address when prompted for an IP address.  


  3. Enter the interface name to map the interface as shown in the WebUI when prompted by the interface mapping shell script.

    Info
    titleInfo

    The interface mapping shell script requests that the user provide the interface name to map the interface as shown in the WebUI.

    Use the MAC address (identified in the virtual machine editing portion during Installing SBC SWe Edge on your specific platform) in order to correctly map the interface. The interface name and MAC address are required to properly activate the interface and have it appear on the WebUI.


  4. Enter an admin interface name. Example: mgt0.

  5. Enter an Ethernet 1 Media interface name. Example: pkt0.

  6. Enter each subsequent Ethernet Media interface Name, and then apply the changes.

...



  1. Saving Interface Mapping

...

  1. :


  1. Image Modified

...


Info
iconfalse
If the network mapping and connection are correct, the Admin IP address will display on the console port. If the Admin IP address does not display, check the connections and network mapping.

   

Note
iconfalse
titleNote
If DHCP is used, 
Spacevars
0series3
 will automatically reboot before initial setup. If a static IP address is set, 
Spacevars
0series3
 will automatically reboot after Running Initial Setup on SBC SWe Edge  from the WebUI.


Note
iconfalse
titleNote
If this is the first time interface mapping is being done, the system will automatically reboot. Any future remapping of interfaces will not automatically trigger a reboot, but will inform the user that they need to do so in order for the changes to be placed into affect.

...


Panel

...

bgColor

...

transparent

Proceed

...

to: Running Initial Setup on SBC SWe Edge.

...