Page History

...

Step 2: Create Resource Group

...

1. Connect to the Azure portal. Refer to portal.azure.com.

2. From the menu, click Create a Resource.

3. In the search bar, enter Ribbon and click <Enter>. From the selections, click on

   Spacevars
   0 series3

   .
   

   

   
   

4. Review the product description and click Create.
   

   

   
   

5. In the Basics tab, configure the fields as described below.

6. From the Resource group drop down list in the left side menu, select the Resource Group created previously (i.e., SWeLite-RG)

   Info
   To view recommended VM sizes, refer to Virtual Machine Requirements - Microsoft Azure.

   
   

7. In Virtual machine name field, enter SWeLite.

8. In Size, click Change size to select the applicable VM size. To determine the required VM size, refer to Calculating Virtual Machine Requirements for an SBC SWe Lite.Edge Supported VM sizes include:

   1. B1ms

   2. B2s

   3. DS1_v2

   4. DS3_v2

9. In Authentication Type, click on Password.

10. Enter Username, Password, and Confirm Password.
    
    

    

    
    

11. Click Next: Disks.

12. From OS disk type drop down list, select Premium SSD.

    

    
    

13. Click Next: Networking.

14. Review and verify the default fields.
    
    

    

    
    

15.  Click Review + Create.

16. A screen indicates validation of the VM has passed.

    

    
    

17. Click Create. A VM status is displayed.

    

    
    When finished, this message is displayed: Your deployment is complete.

    
    

18. From the main menu, select Virtual Machines. The newly created 

    Spacevars
    0 series3

    instance is displayed.
    
    

    

    
    

...

1. Connect to the Azure portal. Refer to portal.azure.com.
2. From the menu, click Virtual Machines.
3. Click on the newly created

   Spacevars
   0 series3 1 bold

   .

4. From Settings, select Networking.

5. Under Inbound port rules, restrict the HTTP and HTTPS access to pubic and private address. See below.

   Info
   To ensure the management interface for the  Spacevars 0 series3 can only be reached from the IP address(es) you specify, restrict the HTTP and HTTPS access to your personal IP address (per previous step).

   

   

   
   

6. Click Save.

   
   

   Info
   The Public IP and Private IP addresses in the example screen below; these values are required for subsequent  Spacevars 0 series3 logins during Running Initial Setup on SBC SWe Lite.Edge

   

   
   

Step 7: Run Initial Setup

...