Versions Compared

Old Version 2

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Spacevars
    0longproduct
    - Configure the Management IP address or FQDN.

  • Spacevars
    0product3
    - Configure the Management IP address or FQDN and the Management ID.

  • Spacevars
    0series5
    - Configure the Management IP address or FQDN and the Management ID.


Note
titleCaution

When you enter the Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the

Spacevars
0product3
cannot connect to the Ribbon Application Management Platform.

...

  1. Access a compatible web browser.
  2. In the browser, enter the IP address of the 
    Spacevars
    0product
     in the URL address bar. The Welcome to Ribbon screen is displayed.
  3. Review the Pre-Login message.
  4. Enter the administrator User Name and Password configured during initial setup.
  5. If the Acknowledge Pre-Login Message checkbox is displayed, click on it to acknowledge you have reviewed the pre-login information above. After initial login, you can enable and disable this checkbox via the Global Security Options. By default, this checkbox is configured as disabled.

  6. Click Login. The main screen provides all WebUI functions, including tabbed options, menu tree, device name, and the last login date and time of the system.

  7. Select Settings > System > Node-Level Settings.

     


    Note
    titleCaution

    When you enter the Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the

    Spacevars
    0product3
    cannot connect to the Ribbon Application Management Platform.


  8. Use the following table to configure the Ribbon Application Management Platform (RAMP) panel.

    Ribbon Application Management Platform Parameters

    ParameterDescription
    Connect to RAMP 

    Configure this field to enable or disable the Ribbon Application Management Platform.

    • No (default) - The Ribbon Application Management Platform is disabled.
    • Yes - The Ribbon Application Management Platform is enabled.
    • Yes with Redundancy.
    Management Address

    Configure this field with the IP address or FQDN of the Ribbon Application Management Platform.

    Note: This field applies only when the RAMP field is set to Yes.

    Management ID

    Caution: When you enter the Ribbon Application Management Platform Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the 

    Spacevars
    0product3
    cannot connect to the Ribbon Application Management Platform.

    Configure this field with the Management ID for the Ribbon Application Management Platform.

    Note: This field applies only to the

    Spacevars
    0product3

     and Spacevars0series5

    . The 
    Spacevars
    0longproduct
    automatically sends the MAC address to the Ribbon Application Management Platform.

    Note: This field applies only when the Connect to RAMP field is set to Yes.

    RAMP Connection

    The status of the SBC’s connection to the Ribbon Application Management Platform. This status may be one of the following:

    • Down
    • Up

    Note: This field applies only when the Connect to RAMP field is set to Yes.

    RAMP Tunnel Status

    The status of the HTTPS tunnel from the RAMP to the SBC. This status may be one of the following:

    • Not Connected
    • Up

    Note: This field applies only when the RAMP field is set to Yes.

    RAMP Online Licensing

    The status of the RAMP Licensing on the SBC. This status may be one of the following:

    • None 
    • NWDL
    • SBCaaS (Ribbon Connect)

    Note: This field applies only to the

    Spacevars
    0product3

     and  Spacevars0series5

    .

    Note: This field applies only when the RAMP field is set to Yes.


  9. Click Apply.