Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

The screen shot below is for an SBC 2000.

Panel
borderStylenone
Caption
0Figure
1


SIP Signaling Group - ICE-Lite Configuration

Image Modified

The following fields must be configured to enable the ICE-Lite feature:

ICE Support

...

...


ICE Support - Field Definition

FieldLocationDefinition
ICE SupportSettings > SIP Signaling GroupEnables/disables ICE support. This field must be enabled for ICE-Lite to be active.

Pagebreak


ICE Mode

...

...


ICE Mode - Field Definition

FieldLocationRecommended Configuration
ICE ModeSettings > SIP Signaling Group

Specifies the Interactive Connection Establishment (ICE) mode.

Valid entries:

For SBC 1000/2000: Lite or Full. To access the ICE-Lite feature, set this field to Lite.

For SBC SWe

...

Edge: This field is configured as Lite automatically when ICE support is Enabled.


Interoperability Notes

ICE-Lite impacts the following on the SBC 1000/2000 and SBC SWe LiteEdge.

SBC FeatureSupportsDoes not Support

ICE Restarts

The

Spacevars
0product
does not support ICE restarts as required to change the destination of a data stream.


(tick)

TURN server operation

The

Spacevars
0product
does not support TURN server operation. With some topologies the ICE protocol may require use of a TURN server to traverse a NAT on the
Spacevars
0product
side; the
the SBC is unable to establish connectivity between endpoints in such scenarios.


(tick)

STUN Server Operation with Full ICE Mode Only

The

Spacevars
0product
supports STUN server operation for gathering candidates only when the ICE Mode is Full, not with the Lite ICE Mode.


 (tick)

Internet Connection Using UDP Candidate

As an ICE-Lite agent (controlled agent only) , the

Spacevars
0product
connects to the public Internet using a single host UDP candidate.

(tick)

RTP and RTCP Media

The

Spacevars
0product
supports Real-Time Transport Protocol (RTP) and Real-Time Transport Control Protocol (RTCP) as two separate components for each candidate unless data streams are multiplexed on the same port.

(tick)

Ports for RTP and RTCP

The

Spacevars
0product
supports sending and receiving RTP and RTCP on nonconsecutive ports for the
Spacevars
0longproduct
and the
Spacevars
0product3
.

(tick)

IPv4 Support Only

As an ICE-Lite agent, the

Spacevars
0product
connects to the public IP address using a single IPv4 address.

(tick)

...