Page History
...
| 0 | Figure |
|---|---|
| 1 | DHCP Pools |
- In the WebUI, click the Settings tab.
From the left navigation pane, go to Protocols > IP > DHCP > Pools.
...
| borderStyle | none |
|---|
Modifying a DHCP Pool
| Include Page | ||||||
|---|---|---|---|---|---|---|
|
...
From the DHCP Pools window, click on the ( ) at the top of the screen.
...
| borderStyle | none |
|---|
...
...
Pool Attributes - Field Definitions
...
The Vendor-Identifying Vendor Options are DHCP option 124/125 (defined here: http://tools.ietf.org/html/rfc3925).
| Noprint | |
|---|---|
|
| Cloak | ||
|---|---|---|
| ||
Pool Attribute Configuration - ExampleBelow is an example configuration for a Polycom (CX500) phone. Follow the initial instructions for and configure as shown below. These fields must be configured before the Vendor specific configuration below. noneFigurePool Attribute Configuration INLINEnoneFigureVendor Specific Information INLINE |
Vendor Specific Information - Field Definitions
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the Vendor-Identifying Vendor Option data to be sent. A valid entry can be either an ascii string of the attribute or a hex string in the aa:bb:cc format. Maximum length: 64 characters. |
...
Overview
Content Tools