Page History
...
Note |
---|
The SIP Voice Quality reporting is a licensed feature. To enable this feature, you should obtain the feature license. For more information, see Working with Licenses Node-Locked Licensing - SBC 1000/2000 and SBC SWe Edge. |
Note |
---|
The voice metrics will be collected only in the DSP mode; audio metrics will not be collected for any call routed in the Proxy or Direct Media mode. |
...
- In the WebUI, click the Settings tab.
In the left navigation pane, go to SIP > SIP Voice Quality Server.
The following window appears.Caption 10 Figure Anchor SIP Voice Quality Server Settings 3 SIP Voice Quality Server Settings Select Enable from the SIP Voice Quality Reporting drop-down menu. For detailed information on the fields, see SIP Voice Quality Server Settings - Field Definitions.
Enter the IP Address or Fully Qualified Domain Name (FQDN) of the UCD server that receives the NOTIFY.
Enter the port of the server that receives NOTIFY.
Select an entry from the Transport Protocol field. The available options are: TCP, UDP, and TLS.
When the selected Transport Protocol is TLS, then the default TLS Profile is Default TLS Profile.Enter the Reporting Interval value field.
Enter the Impairment Threshold value.
1 Select the SIP Signaling group(s). To select a SIP Signaling group, click Add/Edit button.
The following window appears.Caption 0 Figure Anchor Selecting IP SG 3 Selecting IP SG - Select the SIP Signaling group(s) from the list.
- Click OK.
- Click Apply.
...
Cloak |
---|
To enable Voice Quality server reporting in the Lync SIP Signaling Group:
This SIP Signaling Group is used to send QoE Information to the server. You can track the statistic by looking at the counter. |
...