Page History
...
From the Create Signaling Group drop down box at the top of the Signaling Group Table, select CAS Signaling Group.
Panel borderStyle none Caption 0 Figure 1 Create CAS Signaling Group Anchor properties properties
...
Info | ||
---|---|---|
| ||
The SBC supports a basic Unconditional Call Forward, but it allows various characters to be configured for keycodes. This includes the '#' character, which is defined in the SBC as an End of Dial digit. In order to determine if an entry is part of a Call Forward activate or deactivate keycode, End of Dial behavior is ignored for the first 6 characters dialed. If the SBC finds that the digits do not match the call forward keycode, it will parse the number backwards to the last '#' (if there is one) and remove it before sending the number for routing. This means that '#' will not stop the inter-digit timer and immediately send the number during collection of the first 6 digits. | ||
Caption | ||
0 | Figure1 |
Call Forwarding Feature
Activate through a Telephone
...
Panel | ||||
---|---|---|---|---|
| ||||
Specifies the telephone number in which forwarded calls are sent. Available only when Call Forwarding Activated is set to Yes. An activation at the physical phone level automatically activates the feature in this field for the applicable channel. |
...