Page History

Callback Pool Identifier

None

None

Sets the Emergency Callback Numbers Table to be used for calls destined to 911.

Passthrough ELIN Number

The Input Field can be set to the public emergency number (like 911) or any other emergency number.

Passthrough Elin Number enables the SBC to use the Elin number in the NAM field of an incoming SIP invite message. The Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative callback number for outgoing E911 calls and is always preferred.

In the box, use the following configuration:

• Input Field Type: ELIN Identifier
• Output Field Type: Callback Pool Identifier
• Output Field Value: Passthrough Elin Number

Called Address/Number

DNIS (ISDN IE 0x70)

Request URI

The called number

None 

==facsimileTelephoneNumer==

==homePhone==

==ipPhone==         

==mobile== 

==pager==   

$InputfieldValueEnum0

Presence - Called Address Number is used to match the call type against the input values. The Presence type enables fields to be automatically filled in with "typical selections" that are used with Presence, from which you can choose or edit.

When transformation is done for Presence, the format of Input Value field must be in the format: ==attributeName==. Although the drop down box is populated with the "typical selections", you can edit as desired (using the same format)

How this field is Used

When a non-Lync endpoint desires its presence to be published, the connection of both incoming and outgoing calls will trigger presence. It is mandatory to have an entry in the Active Directory (AD) that is associated with the non-Lync endpoint.

The Presence - Called Address/Number input entry selects an Active Directory (AD ) attribute that is associated with the non-Lync endpoint; this AD attribute can be any field (i.e., homePhone, ipPhone, etc.). An AD cache look up for the AD attribute is matched against this field entry, and the match is copied into thePresence - Called Number Output Value field.

It is this called presence value that will be used in the Request URI, To and From headers of the Publish message that announces the presence status.

Called Extension

None

Request URI

Sets the ;ext=

None

To: tel:2222<sip:2222;ext=2222@192.168.1.20>

Called Numbering Type

ISDN IE 0x70 

Describes the format of the called number. Aids the receiving switch in understanding if this is a SIP or ISDN National formatted number, as an example.

Unknown
Subscriber
National
National-specific
Abbreviated
International
Subscriber (oper.req)
National (oper.req)
International (oper.req)
Not Present (oper.req)
Not present (cut through)
950 call
Test Line Test Code
h323/SIP

Setting to ISDN includes user=phone in the Request URI

H323/SIP removes user=phone from the Request URI

Called Phone Context

None

Request URI

Sets the phone context for tel uri calls

None

To: tel:2222<sip:2222;phone-context=example.com@192.168.1.20>

Called Numbering Plan

ISDN IE 0x70 

Describes the called number's numbering scheme or standard.

Any/Untranslated:
For Input, any type is accepted.
For Output, the plan will remain unchanged.

Unknown: The type is unknown.

ISDN: E.164 format

Data: ITU X.121 format

Telex: ITU F.69 format

National: The standard national numbering plan

Private: A private numbering plan

Telephony: same as ISDN

Calling Address/Number

ANI (ISDN IE 0x6C)

FROM header

The Calling Number

None

==facsimileTelephoneNumer==

==homePhone==

==ipPhone==         

==mobile== 

==pager==   

Presence - Calling Address Number  is used to match the call type against the input values. The Presence type enables fields to be automatically filled in with "typical selections" that are used with Presence, from which you can choose or edit.

When transformation is done for Presence, the format of Input Value field must be in the format: ==attributeName==. Although the drop down box is populated with the "typical selections", you can edit as desired (using the same format).

How this field is Used

When a non-Lync endpoint desires its presence to be published, the connection of both incoming and outgoing calls will trigger presence. It is mandatory to have an entry in the Active Directory (AD) that is associated with the non-Lync endpoint.

The Presence - Calling Address/Number input entry selects an Active Directory (AD ) attribute that is associated with the non-Lync endpoint; this AD attribute can be any field (i.e., homePhone, ipPhone, etc.). An AD cache look up for the AD attribute is matched against this field entry, and the match is copied into the Presence - Calling Number Output Value field.

It is this calling presence value that will be used in the Request URI, To and From headers of the Publish message that announces the presence status.

Calling Extension

None

Request URI

Sets the ;ext=

None

From: 5551234<sip:5551234;ext=1234@192.168.1.10>

Calling Address/Number,
User Specified

ANI (ISDN IE 0x6c)

None?

Calling Number supplied by the user in addition to the one supplied by the telephony network

None 

Calling Numbering Type

ISDN Numbering Type, IE 0x6C 

Describes the format of the calling number; aids the receiving switch in properly processing the number based upon the configured number type.

Unknown
Subscriber
National
National-specific
Abbreviated
International
Subscriber (oper.req)
National (oper.req)
International (oper.req)
Not Present (oper.req)
Not present (cut through)
950 call
Test Line Test Code
h323/SIP

Setting to ISDN includes user=phone in the Request URI

H323/SIP removes user=phone from the Request URI

Calling Numbering Plan

ISDN Numbering Plan, IE 0x6C 

Describes the calling number's numbering plan.

Any/Untranslated:
For Input, any type is accepted. For Output, the plan will remain unchanged.
Unknown: The type is unknown.

ISDN: E.164 format

Data: ITU X.121 format

Telex: ITU F.69 format

National: The standard national numbering plan

Private: A private numbering plan

Telephony: same as ISDN

Calling Number Presentation

ISDN Pres. Indicator, IE 0x6C 

Controls how the downstream device displays/processes the Calling Number.

Allowed: Display the calling number

Restricted: Do not display the calling number

Not Available

Reserved

May also affect how the downstream device processes the P-Asserted ID or the P-Preferred ID

Calling Number Screening

ISDN Screening Indicator, IE 0x6C 

Denotes how/if the calling number has been verified

User - Not Screened: Set by the client, not checked by the sending switch

User - Verified: Set by client, verified by the sending switch

User - Failed: The sending switch confirms this number as invalid

Network: The previous switch provided the calling number

May also affect how the downstream device processes the P-Asserted ID or the P-Preferred ID

Calling Name

ISDN IE 0x1C
or IE 0x28

FROM header

The calling name

None

Calling Phone Context

None

FROM header

Sets the phone context for tel uri calls

None

To: tel:2222<sip:2222;phone-context=example.com@192.168.1.20>

All Trunk Groups

Select Specific Trunk

ELIN Identifier

ISDN IE 0x6c,
Calling Number

FROM header

Sets the Emergency Line Identifier that the PSAP will use to lookup the location in the location database.

None 

Original Called Number

ISDN IE 0x1C

DIVERSION header

Specifies the original number when a call has been redirected

None

The redirecting number is the number the call was last redirected from. The original called number is just that, the very first called number, which in the case of multiple redirections can be different.

Original Destination Number

None

TO Header

Specifies the number in the TO header

None

This differs from the Called Number which is set from the SIP Request URI

When transformation is done for Presence, the format of the Output field: =attributeName=. You can edit as desired (using the same format).

How this field is Used

For Presence to be published, an AD cache look up for the AD attribute (associated with a non-Lync endpoint) is matched from the Called Address/Number (Presence) Input Value field, and the match is copied into this field. This value that will be used in the Request URI, To and From headers of the Publish message that announces the presence status.

When transformation is done for Presence, the format of the Output field: =attributeName=. You can edit as desired (using the same format).

How this field is Used

For Presence to be published, an AD cache look up for the AD attribute (associated with a non-Lync endpoint) is matched from the Calling Address/Number (Presence) Input Value field, and the match is copied into this field. This value that will be used in the Request URI, To and From headers of the Publish message that announces the presence status.

Redirecting Number

ISDN 0x74

DIVERSION header

HISTORY-INFO header

Specifies the number to which a call should be redirected to

None

For SIP calls, use the Redirecting IE to change the SIP Diversion

Incoming HISTORY-INFO headers will be mapped to the Redirecting Number transformation IE

Redirecting Numbering Type

ISDN 0x74 

Same as Types above

Same as Types above 

Redirecting Numbering Plan

ISDN 0x74 

Same as Plans above

Same as Plans above

Transfer Capability

Used for permanent circuits. Not presently supported by companySBC 1000/2000