Page History
...
Info |
---|
Later in this article, you will create a CAS Signaling Group and assign channels and ports, they must match the physical ports to which the FXS devices are connected. |
Panel | ||||
---|---|---|---|---|
| ||||
Caption | ||||
| ||||
borderStyle | none||||
Panel | ||||
Caption | ||||
---|---|---|---|---|
| ||||
borderStyle | none||||
Panel | ||||
Caption | ||||
---|---|---|---|---|
| ||||
|
Pagebreak |
---|
Configuration
CAS Signaling Group and FXS Port configuration
Create an FXS Signaling Profile for CAS.
Note Make sure to set the Channel Hunting to Own Number, otherwise the first free channel will answer every call (regardless of any other configuration settings).
Create an Assigned Channel and apply the desired phone number to the corresponding FXS port.
Tip You may add all of the port/number combinations for FXS in a single Signaling Group.
Panel borderStyle noneCaption 0 Figure 1 Create Assigned Channel Verify that the CAS Signaling group is configured as shown below.
Panel borderStyle noneCaption 0 Figure 1 Verify Configuration of CAS Signaling Group
- Verify that the FXS-attached phone(s) now have dial-tone.
...
Overview
Content Tools