Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a0c86ca23f8a016cd6ed6fe900138a00a0c87a8bc654017a90dcbbab0002, userName='null'}
JIRAIDAUTHTPEM-54826855
REV5UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d00038a00a0c85f4199b1015f7ea6e836000d, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d00038a00a02355cd1c2f0155cd26cd8b0a59, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a0c866dc3dee0166e544fde30008, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a0c8601a1bc701602339d11900068a00a0c8652ba79201656dbe5f14001b, userName='null'}

Panel

In this section:

Table of Contents
maxLevel3

...

  1. Choose Network from the Configuration Menu.

  2. Scroll to WAN Interface IPv4 Settings. The Static IP radio button is selected by default (see IPv4 Static IP).


  3. Select one of the following methods to establish an Internet connection:

...

    • IPv4 PPPoE
    • IPv4 DHCP
    • IPv4 Static IP
    • IPv4 VLAN
    • IPv4 T1
    • IPv4 Mobile

For more configuration options, refer to Mobile Diagnostics.

...

Use an integrated ADSL modem.

Info

This is available only on certain models, including the 

Spacevars
0product2
 200AE1, 200AE2, and 250W.

...

.

...

Anchor
ipv4pppoe
ipv4pppoe
IPv4 PPPoE

...

  1. Choose Network from the Configuration Menu.
  2. Scroll to WAN Interface IPv4 Settings.

  3. Select Static IP to configure the WAN interface manually. Static IP is selected by default.


  4. In the IP Address field, enter an IP address.
  5. In the Subnet Mask field, enter a subnet mask.
  6. Proceed to Configuring Network Default Gateway Settings.

Anchor
ipv4vlan
ipv4vlan
IPv4 VLAN

...

This setting is available when you select Static IP (Ethernet). See IPv4 Static IP.

  1. Choose Network from the Configuration Menu.

  2. Scroll to Network Settings.


  3. Enter the default gateway address.
  4. Click Submit. A message indicates that service will be interrupted.
  5. Click OK to confirm.

...

Info
You can only get a DNS server automatically if you have a dynamic link like ADSL, PPP, or DHCP.

To configure the DNS server:

...