Page History
| Panel | ||||||
|---|---|---|---|---|---|---|
In this section:
|
| Add_workflow_for_techpubs | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Overview
The SBC Core includes the native Linux commands The SBC is enhanced to include the native Linux commands ping and traceroute (and their IPv6 variants) from the SBC command line interface. To use the commands at the SBC application level, log on to the SBC as an application administrator.
These commands are useful to test node connectivity and other network issues without leaving the application command line.
| Info | ||
|---|---|---|
| ||
For an HA pair configuration, you can run CLI commands |
Command Syntax
| Info | ||
|---|---|---|
| ||
The commands, options, and syntax available from the SBC CLI are exactly same as Linux and Unix platforms. |
Command Syntax
| Info | |
|---|---|
| title | Note
|
ping
| Code Block |
|---|
> ping [-LRUbdfnqrvVaAD] [-c <count>] [-i <interval>] [-w <deadline>] [-p <pattern>] [-s <packetsize>] [-t <ttl>] [-I <interface>] [-M <pmtudisc-hint>] [-m <mark>] [-S <sndbuf>] [-T <tstamp-options>] [-Q <tos>] [hop1 ...] <destination_IPv4_address> |
ping6
| Code Block |
|---|
> ping6 [-LRUbdfnqrvVaAD] [-c <count>] [-i <interval>] [-w <deadline>] [-p <pattern>] [-s <packetsize>] [-t <ttl>] [-I <interface>] [-M <pmtudisc-hint>] [-m <mark>] [-S <sndbuf>] [-T <tstamp-options>] [-Q <tos>] [hop1 ...] <destination_IPv6_address> |
traceroute
| Code Block |
|---|
> traceroute [ -46dFITnreAUV ] [ -f <first_ttl> ] [ -g gate,... ] [ -i <device> ] [ -m <max_ttl> ] [ -N <squeries> ] [ -p <port> ] [ -t <tos> ] [ -l <flow_label> ] [ -w <waittime> ] [ -q <nqueries> ] [ -s <src_addr> ] [ -z <sendwait> ] [ --fwmark=<num> ] host [ <packetlen> ] |
traceroute6
| Note | ||
|---|---|---|
| ||
The traceroute6 command is not supported in SBC release versions 9.2.x to 11.0.x. It is supported from SBC version 11.1.x onwards. |
| Code Block |
|---|
> traceroute6 [ -46dFITnreAUV ] [ -d ] ---Use SO_DEBUG socket option [ -f <first_ttl> ] [ -g gate,... ] [ -i <device> ] ---Bind to <device> [ -m <max_ttl><hops> ] ---Use maximum <hops> [ -n ] -N <squeries> ] ---No dns name resolution [ -p <port> ] ---Use destination <port> [ -t <tos> ] [ -l <flow_label> ] [ -w <waittime> ] [ -q <nqueries> ] <nprobes> ] ---Number of probes [ -r ] ---Use SO_DONTROUTE socket option [ -s <src_addr> ] <address> ] ---Use source <address> [ -v ] ---Verbose output [ -w <timeout> ] ---Time to wait for response [ -z <sendwait> ] [ --fwmark=<num> ] host [ <packetlen> ] |
Parameter Descriptions
For parameter descriptions and other information on the ping and traceroute commands commands and their IPv6 variants, refer to the Linux manual pages on the internetInternet. Alternatively, you may refer to the manual pages installed as part of the Linux platform on the SBC. To access the manual pages installed on the SBC:
- Log on to the SBC as
root.
Issue the command:
Code Block # man <command>
Configuration Examples
| Info | ||
|---|---|---|
| ||
|
ping
| Code Block |
|---|
> ping -c 3 10.31.200.50 PING 10.31.200.50 (10.31.200.50) 56(84) bytes of data. 64 bytes from 10.31.200.50: icmp_req=1 ttl=255 time=5.28 ms 64 bytes from 10.31.200.50: icmp_req=2 ttl=255 time=5.69 ms 64 bytes from 10.31.200.50: icmp_req=3 ttl=255 time=4.34 ms--- 10.31.200.50 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 4.340/5.106/5.693/0.566 ms |
ping6
| Code Block |
|---|
> ping6 -c 2 0000:0000:0000:0000:0000:0000:0000:0001 PING 0000:0000:0000:0000:0000:0000:0000:0001(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.031 ms 64 bytes from ::1: icmp_seq=2 ttl=64 time=0.060 ms--- 0000:0000:0000:0000:0000:0000:0000:0001 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 999ms rtt min/avg/max/mdev = 0.031/0.045/0.060/0.016 ms |
traceroute
| Code Block |
|---|
> traceroute 10.31.200.50 traceroute to 10.31.200.50 (10.31.200.50), 30 hops max, 60 byte packets 1 10.31.200.50 (10.31.200.50) 9.487 ms 9.493 ms 9.491 ms |
traceroute6
| Note | ||
|---|---|---|
| ||
The traceroute6 command is not supported in SBC release versions 9.2.x to 11.0.x. It is supported from SBC version 11.1.x onwards. |
| Code Block |
|---|
> traceroute6 0::0.0.0.0 traceroute to 0::0.0.0.0 (::), 30 hops max, 80 byte packets 1 localhost (::1) 0.033 ms 0.009 ms 0.008 ms |
pagebreak
Overview
Content Tools