...
This table must ultimately provide a route to each potential call destination IP address. The static route is used to add static IP routes for the IP interfaces. A static route indicates the nextHop gateway and IP interface that should be used for a particular peer network IP prefix.
| Include Page |
|---|
| Unique_IP_for_SigPort |
|---|
| Unique_IP_for_SigPort |
|---|
|
...
To create a new Static Route, click New Static Route tab on the Static Route List panel.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Static Route Fields |
|---|
|
 Image Removed
|
The The Create New Static Route window is displayed.
...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Static Route Parameters |
|---|
|
Parameter
|
Description
|
|---|
Destination IP Address
| The destination IP address. The following IP address types are supported:
• IPv4—This is V4 IP address in dotted decimal form (for example 128.127.50.224).
• IPv6—This is V6 IP address in hexadecimal/colon form (for example,
1280:1276:3350:2224:2222:3333:8888:1245 or fd00:21:445:128::7880). Default is
0:0:0:0:0:0:0:0. | Prefix
| The IP prefix of this static route entry. | Next Hop
| The address of the next system en-route to the destination. | IP Interface
Group Name
| The name of an IP interface group. | IP Interface
Name
| The name of the IP interface for this entry. | Preference
| Route preference value. | Condition | An element in the Static Route configuration that holds the conditions on the basis of which routes are added to a SBC pair with HA configuration. Currently, Condition supports only one child element - CE Name. NOTE: The Condition option is only applicable to non-management interfaces. | CE Name | The name (1 - 255 characters) of the computing element that hosts the port used by the IP interface. |
|
| Note |
|---|
For a High Availability (HA) pair configuration, the SBC allows configuring a Static Route for a specific host or CE Name among the active and standby hosts of a HA pair configuration using the Condition element. The Condition element store the conditions on the basis of which routes are added to a SBC pair with HA configuration. Currently, the Condition element only supports the CE Name element. |
...
Click Copy Static Route tab on the Static Route List panel.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Static Route Fields |
|---|
|
 Image Removed
|
The The Copy Selected Static Route window is displayed along with the field details which can be edited.
...
| Note |
|---|
- The SBC does not allow to delete the
CE Name separately. Static Route is deleted only from the instance in which it is configured, and not from both active and standby instances of a HA pair SBC configuration.
|
...