Parameter | Description |
---|
cdrVerToGenerate | The SBC version on which the CDRs must remain formatted even after the SBC software is upgraded. The valid values for the configuration option are 0 or 10.1 for the SBC 10.1 release. The default value for the configuration is 0 (disabled). If the option is disabled, the CDRs are formatted according to the CAM version of the software release loaded on the SBC. Note: The valid values list will change over time to support future releases. | - - , indicates this control is disabled)
- 10.1
Examples of how the configuration control works, if the users do not want to update the billing systems with every SBC upgrade: Upgrade Scenario | Action and/or Effect |
---|
Upgrade from SBC 8.2 (or any old release) to 10.1 | The new control does not take effect. | Upgrade from SBC 8.2 ( or any old release) to 11.1 (or future releases later than 10.1) | - Baseline the SBC release and the Billing Systems to SBC 10.1.
- Once the SBC and the billing system are on SBC 10.1, set the new configuration on the SBC to "10.1" from 0 (disabled).
If the configuration is set to the currently-loaded SBC software version (provided the current SBC loaded version is greater than or equal to 10.1) the CDR formatting is retained according to the selected SBC version across the upgrades. | Upgrade from SBC 10.1 to 11.1 (or future release later than 10.1) | Set the new configuration to 10.1 from 0 (disabled) prior to the upgrade. | Fresh installation of the SBC (version greater than or equal to 10.1 ) | - Set the configuration before the SBC is commissioned to take the calls.
- Ensure the configuration on the new SBCs are set to 10.1 as a part of the initial config load, before taking any traffic.
Example: you are planning to add more SBCs to a cluster already using the current feature (the SBC version is 11.1 and the CDRs are formatted to 10.1 by having the new config set to 10.1 on the SBCs). |
|
Generate SIP Recording CDR | Enables or disables generation of CDRs for recording SIP calls. | disabled
| enabled
|
Generation Mode | The type of calls for which accounting records should be logged on this system: origination Origination (default)—Log accounting records for which this system is the originating gateway.destination Destination—Log accounting records for which this system is the destination gateway.allcalls All Calls—Log accounting records for all calls.none None—Log no accounting records. For SIP and H323 calls, accounting records are generated for all calls (ingress and egress), unless this value is none.
|
Intermediate Acct State | Specifies whether Intermediate Accounting is Enabled or Disabled for the Node. Options are: disabled Disabled (default)enabled - Enabled
|
Intermediate Acct Interval | This configures the intermediate accounting interval in seconds. Note: This object is only applicable when "sonusAcctIntAcctMode" is set to interval(1).
|
Second Stage Inherit First Stage | Enable flag to allow second allow second stage accounting records for two stage calls to inherit fields from the first stage call. Options are: false False (default)true - True
|
Populate Non-ported LNP Numbers | Enable flag to populate the populate the Called Number Before Translation field in the accounting record for a number for which an LNP lookup was performed and lookup indicated that number has not been ported. Options are: - False
- True
false true (default)
|
Intermediate Acct Mode | Specifies the method by which intermediate records are generated. Options are: interval Interval (default)—Generate an intermediate record for each "intermediateAcctIntervalseconds " (in seconds) throughout the call.telcordia Telcordia—Generate an intermediate record whenever the call exceeds the configured "intermediateLongDurThreshold" value (in hours) and the "intermediateLongDurGenTime" (of day) is reached.
|
Intermediate Long Dur Gen Time | Specifies Octet string that identifies the GMT time to generate Telcordia Long Duration accounting records. The format is 00:00:00.0 where each field is: Code Block |
---|
| field octets contents range
----- ------- ------------ -----
1 1 hour 0..23
2 2 minutes 0..59
3 3 seconds 0..60 (use 60 for leap-second)
4 4 deci-seconds 0..9 |
|
Start Acct State | Specifies whether Start Accounting is Enabled or Disabled for the Node.Options are: - Enabled (default)
- Disabled
|
Event Acct State | Enable flag to generate EVENT records for OOD SUBSCRIBE, REFER, NOTIFY, REGISTER, OPTIONS, MESSAGE and PUBLISH event records. CDRs are logged when OPTIONS is relayed to the egress side. - Disabled (default)
- Enabled
|
Event Acct PSX Info State | Log event records containing PSX information, such as PSX Congestion level, PSX Processing Time, Policy Response Call Type, PSX Billing Info, Route Label. - Disabled (default)
- Enabled
|
Intermediate Trap State | Specifies whether a trap will be generated whenever an INTERMEDIATE record is generated. Options are: - Enabled
- Disabled (default)
enabled disabled
|
Populate Remote GSX Info State | Specifies whether a destination propagates its billing data to originating GSX for GW-GW calls. Options are: - Enabled
- Disabled
enabled - disabled(default)
|
Early Attempt State | Specifies whether or not to generate early ATTEMPT records. An early ATTEMPT record is associated with an early call disconnect, before the request is sent. Options are: enabled Enabled (default) - – Do not generate early ATTEMPT records.disabled - Disabled – Generate early ATTEMPT records.
|
Intermediate Long Dur Threshold | Specifies the Accounting INTERMEDIATE Records Duration (in hours). Must be 1-24; default is 24. This parameter is only applicable when intermediate records mode is set to telcordiaTelcordia. The INTERMEDIATE record is generated for each call whose duration exceeds this threshold on long duration generation time. |
Send Egress CDR Info on Receipt | Specifies whether or not to send the egress CDR information immediately after receiving and processing it. Options are: - falseFalse (default)
true - True
|
Populate IP TG Far End Switch Type | Specifies whether or not to use Ingress Far End Switch Type passed down from PSX IP TG for SIP ingress calls. Options are: - Enabled
- Disabled
enabled - disabled(default)
|
Patch Ver | Specifies a CAM patch version to roll the accounting file and print version-specific fields. Range: 0-255 / Default: 0 |
Max Record Sequence Num | Specifies the maximum length of the Record Sequence Number field in the CDR. Options are: uint16 Uint16 (default)—16-bit record sequence number 0 to 65535.uint32 Uint32—32-bit record sequence number 0 to 4294967295.
|