Page History
...
- Set the local policy server mode to "outOfService".
CLI:
Code Block language none % set system policyServer localServer PSX_LOCAL_SERVER mode outOfService % show system policyServer localServer PSX_LOCAL_SERVER state disabled; mode outOfService; action dryUp; transactionTimer 2500; keepAliveTimer 5; retryTimer 2500; retries 1;
On SBC main screen, navigate to Configuration > System Setup >Policy Server > Local Server. The Local Server window is displayed.
Caption 0 Figure 1 Local Server
- Set the global configuration.
CLI:
Code Block language none % set system policyServer globalConfig reconnectTimeout 10 switchOverMode automatic congestionControl enabled type mgmt mgmtInterfaceGroup mgmtGroup % show system policyServer globalConfig reconnectTimeout 10; switchOverMode automatic; congestionControl enabled; type mgmt; mgmtInterfaceGroup mgmtGroup
On SBC main screen, navigate to Configuration > System Setup >Policy Server > Global Config. The Global Config window is displayed.
Caption 0 Figure 1 Global Config (Type: mgmt) Caption 0 Figure 1 Global Config (Type: ip) - To configure an external PSX as an Active remote policy server, use settings similar to the example below:
CLI:
Code Block language none % set system policyServer remoteServer PSX1-A ipAddress 10.20.123.12 state enabled mode active % show system policyServer remoteServer PSX1-A ipAddress 10.20.123.12; state enabled; mode active;
On SBC main screen, navigate to Configuration > System Setup >Policy Server > Remote Server. The Remote Server window is displayed.
Caption 0 Figure 1 Remote Server (in Active mode) - To configure an external PSX as a Standby remote policy server, repeat step 3 except set Mode to "standby".
CLI:
Code Block language none % set system policyServer remoteServer PSX1-B ipAddress 10.20.123.13 state enabled mode standby % show system policyServer remoteServer PSX1-B ipAddress 10.20.123.13; state enabled; mode standby;
On SBC main screen, navigate to Configuration > System Setup >Policy Server > Remote Server. The Remote Server window is displayed.
Caption 0 Figure 1 Remote Server (in Standby mode) - To optionally configure
to communicate with a remote policy server that will not receive any query messages from theSpacevars 0 product
but can still send messages to it, set the remote policy server mode to "Spacevars 0 product alternate
".
This deployment model is intended for networks where PSXs are interacting with an SCP which may generate and deliver unsolicited mid-call action events to the SBX via the PSX. In other words, this model connects
to PSXs not directly used by theSpacevars 0 product
to route calls so that it may receive SCP-generated mid-call action events from those PSXs.Spacevars 0 product CLI:
Code Block language none % set system policyServer remoteServer PSX2-A ipAddress 10.20.123.14 state enabled mode alternate % show system policyServer remoteServer PSX2-A ipAddress 10.20.123.14; state enabled; mode alternate;
On SBC main screen, navigate to Configuration > System Setup >Policy Server > Remote Server. The Remote Server window is displayed.
Caption 0 Figure 1 Remote Server (in Alternate mode)
For a complete list of commands and parameters, please refer to either the CLI Reference Guide or EMA User Guide.
Pagebreak |
---|