Page History

The supported SNMP trap types are SNMP v1, v2, and v3. These trap types can be configured. 

The following command is executed in CLI to configure the SNMP traps:

% set oam snmp trapTarget myTarget ipAddress <ip address> state enabled 

Registering/Configuring Insight SNMP Network Management Station for SBC

Perform the following steps to register the

1. Log into the Insight^TM Web-based Element Management System.

   Caption
   0 Figure 1 EMS Screen
   Image Modified

   
   
   

   
   

2. The Users & Roles window appears. Select Insight Administration from the Network Mgmnt roll-up (left hand side of the Users & Roles window).

   Caption
   0 Figure 1 Register SBC EMS
   Image Modified

   
   
   

   
   

3. The Insight Administration window appears. Select SBC 5x00 from the Register Node drop-down menu.

   Caption
   0 Figure 1 SBC EMS Registration
   Image Modified

   
   

4. Provide the name of the

   Spacevars
   0 product

    in the Name field.
5. Provide the Agent Login and Agent Password (default: admin/admin).
6. Provide the information in Default IP Address for Host 1 and Host 2.
7. Click Register.

Creating a View in EMA

Perform the following steps to create a view:

1. Select Fault Manager from the Network Mgmnt roll-up (left hand side of the Users & Roles window). The Fault Manager window appears.

   Caption
   0 Figure 1 View Creation
   Image Modified

   
   

2. Select the Views tab.
3. Select All from the Resource Groups drop-down menu.
4. Select Create. The Create View option appears.
5. Provide a view name in the View Name field.

6. In the Bars option, select Create.

   Caption
   0 Figure 1 Device selection for view creation
   Image Modified

   
   

7. Select the devices from the Available Devices and place them in the Selected Devices option.
8. Click OK. A view for the selected device will be created.

9. Click Save. The view is saved and displayed in the left side pane.

   Caption
   0 Figure 1 Saved View
   Image Modified

   
   

Viewing Traps

Perform the following steps to view the traps:

1. Select Real-Time tab from the Fault Manager window.
2. Select All from the Resource Groups drop-down menu.

3. Select the view from the Views drop-down menu. Click Open. The view is displayed.

   Caption
   0 Figure 1 View Traps
   Image Modified

   
   

4. Double-click the Total Events bar. The Event Names appear for the selected device.

   Caption
   0 Figure 1 Viewing Traps
   Image Modified

   
   

Clearing Traps

Perform the following steps to clear a trap:

1. Select the trap to be cleared.

   Caption
   0 Figure 1 Select alarm to clear
   Image Modified

   
   

2. Select Clear from the Operations drop-down menu. The trap is cleared from the list.

   Caption
   0 Figure 1 Cleared alarm
   Image Modified

   
   
   

   
   

SNMP Traps

The SBC supports following generic SNMP traps apart from the application specific traps or alarms:

• authenticationFailure
• coldStart
• linkDown
• linkUp

The traps are triggered under specific conditions:. For detailed information about these traps, refer to the relevant Trap page using the links provided in the table below.