Page History

...

1. Access the WebUI.
2. Click Tasks > Setup Cloud Connector Edition > Configure CCE.

3. Click the link Click to re-configure CCE application.

4. From the Raw (INI) Config drop down box, select Edit.

5. View the CCE Configuration INI File window; this window enables editing of the CCE Configuration File.

   Caption
   0 Figure 1 CCE Configuration INI File

6. In the INI file, scroll down to the section marked Gateway.

    

   Caption
   0 Figure 1 CCE Configuration INI File - Gateway Section

7. Change the Port to 5067 and Protocol to TLS.

8. Click OK.

   Caption
   0 Figure 1 Update Port and Protocol Fields

9. Click Tasks > Setup Cloud Connector Edition > Prepare CCE.

10. Click Click to re-prepare the CCE.

11. Scroll to the bottom of the window and click Prepare CCE.

12. Enter the CCE VM Password and click OK.

13. Remote desktop to the ASM (refer to Enabling and Disabling Remote Desktop on the ASM).
14. Run the

    Spacevars
    0 company

    CloudLink Deployer application from the icon on the desktop.
15. Click on the first three check boxes:
    
    • Transfer Credentials from SBC: Imports the password that has been set during Preparing the CCE.
    • Register Appliance: Registers this new appliance on your Office365 tenant.
    • Install Appliance: Deploys the CCE.

16. Click Apply.

...