Page History
| Add_workflow_for_techpubs | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Panel | ||||
|---|---|---|---|---|
In this section:
|
...
From the Static IPv6 Route Table, click the Create Static IPv6 Route (
) icon at the top.
Configure the options. See field definitions.
Click OK.
Panel borderStyle none Caption 0 Figure 1 Create Static IPv6 Route Entry 3 Create Static IPv6 Route Entry 
Anchor properties properties
...
Static IPv6 Route Table - Field Definitions
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the Gateway type in which the Static Route uses to communicate. Valid options: Global Address (uses the IPv6 address assigned to the interface) or Link Local Address (uses the Link Local IPv6 address assigned to the interface). The Gateway Type selected prompts additional commands, as follows: |
| Gateway Type Entry | Gateway Field (Mandatory) | Gateway Field (Optional) | Next Hop Interface Field (Mandatory) |
|---|---|---|---|
| Global Address |  | - | - |
| Local Link Address | - | | |
Gateway
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the IPv6 Address of the next-hop router to use for this Static Route. For IPv6, this entry is in a colon-hex notation (i.e., 2001:db8:10::100). Note: This field is mandatroy when the Gateway type is set as Global Address. |
...
Overview
Content Tools