Page History

Add_workflow_for_techpubs

AUTH1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca7f046c, userName='null'}
JIRAIDAUTH	SBX-92375
REV5	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca170394, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca3103e5, userName='null'}

Panel

In this section:

Table of Contents

maxLevel	4

This feature is used to provision a tone and announcement profile, which specifies an announcement package and/or signaling tone package for the

Spacevars

0	product

to use to play announcements or signaling tones to calling or called parties. Tone and announcement profiles are assigned to ingress or egress trunk groups. Also, use this feature to provision Local Ring Back Tones (LRBT) for the

Spacevars

0	product

, which the

Spacevars

0	product

plays to callers upon receipt of an alert indication without a media stream or without an indication of in-band tones.

Info

icon	false
title	Note

For information on Delayed Local Ring Back Tone (DLRBT) and P-Early-Media, see here.

To associate a Tone and Announcement Profile to a Trunk Group, use following syntax:

Code Block

language	none

% set addressContext <addressContext name> zone <zone name> sipTrunkGroup <sipTrunkGroup name> policy media toneAndAnnouncementProfile <profile name>

Command Syntax

Code Block

language	none

% set profiles media toneAndAnnouncementProfile <profile name> 
	localRingBackTone 
		signalingTonePackageState <disable | enable> 
		flags
			announcementBasedTones <disable | enable>
			dynamicLRBT <disable | enable>
			forceLRBT <disable | enable>
			useThisLrbtForEgress <disable | enable> 
			useThisLrbtForIngress <disable | enable> 
		makeInbandToneAvailable <disable | enable> 
		precedence <higher | lower> 
		signalingTonePackage <name> 
	toneAndAnnouncement 
		announcementPackageState <disable | enable> 
		announcementPackage <name> 
		override <disable | enable> 
		sigTonePackage <name>

Command Parameters

Tone and Announcement Profile Parameters

The Tone and Announcement Profile Parameters are described below.

Caption

0	Table
1	Tone and Announcement Profile Parameters

Parameter

Description

toneAndAnnouncementProfile

Use this object to configure the Tone and Announcement Profile.

localRingBackTone

Use this parameter to configure LRBT settings. See Local Ringback Tone Parameters table below for parameter details.

toneAndAnnouncement

This parameter configures the Tone and Announcement package.

announcementPackageState – Enable flag to configure the announcement package.
- disable (default)
- enable
announcementPackage – Enter the announcement package to use for calls associated with the specified ingress and/or egress trunk group(s).
override – When profiles are assigned to both ingress and egress trunk groups, enable this flag to override settings and use this specific announcement profile for both call legs.
- disable (default)
- enable
sigTonePackage – Enter the signaling tone package to use for calls associated with the specified ingress and/or egress trunk group(s).

Local Ringback Tone Parameters

Info

title	Note

To configure localRingBackTone options, first enable the signalingTonePackageState flag.

Info

title	Note

You must enable makeInbandToneAvailable in order to use Local Ringback Tone (LRBT).

Caption

0	Table
1	Local Ringback Tone Parameters
3	Local Ringback Tone Parameters

Parameter	Description
`flags`	Use these flags to enable/disable LRBT for egress and ingress trunk groups. `announcementBasedTones` – Use this flag to generate announcement-based ringback tones without using DSP resources. `disable` (default) `enable` `dynamicLRBT` – Enable this flag for the SBC to select a provisional response for cut-through based on the arrival of media packets. `disable` (default) `enable`NOTE: To support dynamic LRBT for forking behavior of the last provisional response till 180 is received, both this flag and the SIP Trunk Group flag "firstRtp" must be enabled. If firstRtp is enabled, but dynamicLRBT is disabled, forking behavior defaults to the last provisional response. `forceLRBT` – Enable this flag to force the SBC to use the signaling tone package specified in this Tone and Announcement Profile, overriding any ringback tone generated/indicated by the egress end. `disable` (default) `enable` `useThisLrbtForEgress` – Enable flag to use LRBT for egress trunk group. `disable` (default) `enable` `useThisLrbtForIngress` – Enable flag to use LRBT for ingress trunk group. `disable` (default) `enable` `earlyMediaMethod` - Used to play tone when P-Early-Media is configured as `pEarlyMedia`. The options are: `pEarlyMedia` `none` (default) `withOrWithOutSDP` - Used to play tone when P-Early-Media is received in 18x response with or without SDP. The options are: `enable` `disable` (default)
`makeInbandToneAvailable`	Enable this flag to insert an in-band tone indicator (OBCI in the case of ISUP) in a backward message (for example, ACM) when playing local ringback tones. `disable` (default) `enable`
`precedence`	Set this parameter when both the ingress and egress trunk groups have a LRBT associated with them and you want to specify which trunk group has priority over the other. `higher` `lower` (default)
`signalingTonePackage`	`<package name>` – Enter the signaling tone package to use for calls associated with the specified ingress and/or egress trunk group(s).
`signalingTonePackageState`	Enable this flag to configure a signaling tone package. `disable` (default) `enable`

Anchor

	p-early-media_dlrbt
	p-early-media_dlrbt

Multiexcerpt include

MultiExcerptName	p-early-media_dlrbt
PageWithExcerpt	_P-Early-Media_and_DLRBT

Pagebreak

Space shortcuts

Page tree

Versions Compared

Old Version 11

New Version Current

Key

Command Syntax

Command Parameters

Tone and Announcement Profile Parameters

Local Ringback Tone Parameters